[mythtv-users] Recommended Disk Test

Hika van den Hoven hikavdh at gmail.com
Wed Jan 14 03:10:26 UTC 2015


Hoi Jeff,

Wednesday, January 14, 2015, 3:15:58 AM, you wrote:

> On 01/13/2015 02:40 PM, Dick Steffens wrote:
>> My MythTV box is scheduled to go into the shop on Monday because of an
>> intermittent freeze. The symptom is that infrequently (once every two
>> weeks or so, but not regularly) I'll either turn on the TV and get no
>> response to a keyboard even though my wallpaper is there, or I'll try to
>> look at a MythWeb page from another machine but won't be able to
>> connect, or (this happened only once during one of the NFL games last
>> Sunday) the system will freeze during a show. Recovery requires a power
>> cycle. Attempts to SSH into the machine fail due to SSH being unable to
>> find it.
>>
>> Before I take it in to the hardware gurus I want to be sure I've run
>> appropriate tests. I ran memtest with no errors. What disk test should I
>> run that will be a non-destructive test? And, when I run it, do I need
>> to have the backend and MySQL shut down?
>>
>> Are there any other tests I can run to try to narrow down the problem?
>>
>> Thanks.

> Random freezes can be caused by all sorts of issues.  Most common (in 
> order of frequency I have seen them) are:

> 1. RAM: you sometimes need to run memtest for days to see the failure.
> If you have multiple sticks, try reversing the order or removing one at
> a time to see if anything behaves differently.

> 2. Power supply: easy to change and relatively inexpensive.  Not a bad
> idea to have a spare one around anyway.

> 3. Bad caps: if you have a MB from a few years ago this is a common problem:

> http://www.thenakedpc.com/dan/Bulging_Capacitors/close-up.jpg

> ...and they don't have to be leaking to cause system flakiness.

> These can be replaced but are usually a bit tricky if you aren't good 
> with a soldering iron.

> If it's not one of those three things then it gets much harder.  If you
> have removable expansion cards you can try removing those one at a time
> to see if you can isolate the culprit.

> At some point you will probably be better off just upgrading your 
> CPU/MB/RAM and give up on what you have.  Don't forget you will likely
> need to rebuild your initrd to support the new hardware if you go this
> route.

> Also, despite what others have said a failing hard drive doesn't cause
> kernel freezes.  Your system will certainly behave badly, but something
> will be responsive -- even if it is just the capslock light changing 
> when you press caps lock.

> Good luck!

> Jeff
> _______________________________________________

Jet a few remarks:

Weird but try. Removing everything not needed to start, dusting
everything, reinserting basic memory, running a powercycle and
finally reinserting everything, has often solved issues for me.
The logic behind it, that I can see is, that slot contacts can be
subminimal due to dust/pollution and local overloads get a chance to
filter away. Off cause every computer should always be grounded!!!
And never use a regular vacuumcleaner, it causes a lot of statics!

Temperature issues can cause erratic behaviour, but if your bios is
set properly it simply will turn off your machine. You should set it
to turn-off somewhere between 80 and 100 degrees C. Often these issues
are caused by defective fans.

Tot mails,
  Hika                            mailto:hikavdh at gmail.com

"Zonder hoop kun je niet leven
Zonder leven is er geen hoop
Het eeuwige dilemma
Zeker als je hoop moet vernietigen om te kunnen overleven!"

De lerende Mens



More information about the mythtv-users mailing list