[mythtv-users] Issues with my HDHomerun: Resource temporarily unavailable

[Ian Evans]

On Sun, Jan 4, 2015 at 2:48 PM, Mythtv - SIlicondust <mythtv at silicondust.com
> wrote:

> >The short answer is you'll be OK (but see my assumption below).
>
> Nick here from Silicondust...
>
> Please use a high quality 5V regulated switching power supply, >= 1A
> rating (most common are 2A which is fine), 2.1mm inner-diameter plug (not
> 2.5mm), center positive wiring.
>
> Using a non 5V or non regulated power supply may damage the HDHomeRun.
> Using a low quality/noisy 5V power supply may affect performance.
> Recommend not sharing a 5V power supply with multiple devices.
>
> Following the thread - I looked up the mythtv source code - the error
> suggests the machine is unable to connect to the HDHomeRun unit.
> This could suggest a network issue or issue with the HDHomeRun unit.
>
> An interesting test would be to set up a script that runs the following
> every 2 seconds and log it to a file:
> hdhomerun_config <device id> get /tuner0/debug
>
> 1) You will be able to see if the command fails at the same time mythtv
> fails.
> 2) If/when the command starts working again it should say "stop=<n>" which
> may hint as to why it stopped.
>
>
I've got something like this:

#!/bin/sh
while [ 1 ]; do
echo "test"
hdhomerun_config 10305A8C get /tuner0/debug >> mythtest
    sleep 2
done


I'll google around, but how do I echo a time stamp into this?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mythtv.org/pipermail/mythtv-users/attachments/20150104/d7defcb7/attachment.html>