[mythtv-users] ECS Liva for frontend - brief report

[Karl Newman]

On Fri, Jan 2, 2015 at 7:00 AM, Josu Lazkano <josu.lazkano at gmail.com> wrote:

> Hello again,
>
> I have a question about the eMMC disk and file system. This is how I
> have mine (it is the default in Debian Jessie):
>
> # cat /etc/fstab
>
> # <file system> <mount point>   <type>  <options>       <dump>  <pass>
> # / was on /dev/mmcblk0p2 during installation
> UUID=9b8f709f-422e-4850-a2b8-4e97aa083d3b /               ext4
> errors=remount-ro 0       1
> # /boot/efi was on /dev/mmcblk0p1 during installation
> UUID=3B3D-9E9A  /boot/efi       vfat    defaults        0       1
> # swap was on /dev/mmcblk0p3 during installation
> UUID=273a11cb-c78e-4fd0-87a6-967c333d6aae none            swap    sw
>            0       0
> /dev/sda1       /media/usb0     auto    rw,user,noauto  0       0
> /dev/sda2       /media/usb1     auto    rw,user,noauto  0       0
>
> Do you set some options to the file system mount?
>
> I leave the device powered on always. Is it a googd idea to suspend or
> hibernate?
>
> You don't show the sizes of the partitions but that seems like a
reasonable partition layout. I have a 512MB swap partition on mine, but it
doesn't appear to be getting used, which is just as well. I leave mine
powered on all the time. Another user measured the idle power consumption
at around 1 W. With the load that low, why bother shutting down?

Karl
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mythtv.org/pipermail/mythtv-users/attachments/20150102/5f360f49/attachment.html>