[mythtv-users] EPG Anomaly

[Ken Smith]

Michael T. Dean wrote:
> On 04/24/2015 02:52 PM, Simon Hobson wrote:
>> Ken Smith wrote:
>>
>>>> Have you checked to verify that EIT is enabled on that particular 
>>>> channel (the one on the Video Source for the DVB-T tuners)?  
>>>> Perhaps it was accidentally disabled.
>>> Isn't that a setting for the tuner as a whole? And I get EPG's for 
>>> other muxes via that same tuner
>> Both. There's a setting to allow the tuner to be used for EIT, and a 
>> separate setting for each channel.
>
> And another for the Video Source.
>
> This allows you to:
>
>   a) Use only certain tuners for EIT collection (tuner EIT setting)
>   b) Disable EIT collection on only certain channels so that you can 
> use EIT for some channels and XMLTV/SD for other channels on the same 
> Video Source (though never use both on any channel)
>  c) Disable EIT collection on every single channel on a Video Source 
> so you can use XMLTV/SD for all the channels on that Source without 
> having to disable EIT on every single channel in the source
>
> Mike
>
Thanks for the pointers. I've checked those settings. For the channel 
"useonairguide" is set to "1" and the other settings are also set to use 
the broadcast EIT.

Another DVB receiver plugged into the same antenna feed receives the EIT.

Very odd.

And other ideas?

Ken


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.