[mythtv-users] Video playing at 30fps
Peter Bennett (cats22)
cats22 at comcast.net
Tue Nov 11 15:33:42 UTC 2014
On 11/10/2014 04:38 AM, Andrew Wilkinson wrote:
> Hi,
>
> Since upgrading from Mythbuntu 12.04 to 14.04 I've had the issue where
> if booted without the tv being on then there is no signal when the tv
> is switched on. I've resolved the issue by disabling xfsettingsd and
> running a script that calls xrandr on hdmi connect. There is one
> remaining issue, and that's that after my script uses xrandr to turn
> on the screen MythTV plays all recordings at 30fps, making the sound
> higher pitched than usual. If the tv is on when the machine is booted
> the recordings play at 25 fps as usual.
>
> Here is the xrandr output when the TV was on when booted:
>
> Screen 0: minimum 320 x 200, current 1360 x 768, maximum 32767 x 32767
> VGA1 disconnected (normal left inverted right x axis y axis)
> HDMI1 disconnected (normal left inverted right x axis y axis)
> HDMI2 connected 1360x768+0+0 (normal left inverted right x axis y
> axis) 160mm x 90mm
> 1360x768 60.0*+
> 1920x1080i 60.1 50.0 60.0
> 1280x720 60.0 50.0 59.9
> 1024x768 60.0
> 800x600 60.3
> 720x576 50.0
> 720x480 60.0 59.9
> 640x480 60.0 59.9
> 720x400 70.1
> VIRTUAL1 disconnected (normal left inverted right x axis y axis)
>
> And here's the start of the frontend log with -v playback, also when
> the TV was on when booted.
>
> http://pastebin.com/A1DMTgqN
>
> Here is the xrandr output from when the TV was turned off when the
> machine booted:
>
> Screen 0: minimum 320 x 200, current 1360 x 768, maximum 32767 x 32767
> VGA1 disconnected (normal left inverted right x axis y axis)
> HDMI1 disconnected (normal left inverted right x axis y axis)
> HDMI2 connected 1360x768+0+0 (normal left inverted right x axis y
> axis) 160mm x 90mm
> 1920x1080i 60.1 + 50.0 60.0
> 1360x768 60.0*+
> 1280x720 60.0 50.0 59.9
> 1440x576 50.0
> 1024x768 60.0
> 1440x480 60.0 59.9
> 800x600 60.3
> 720x576 50.0
> 720x480 60.0 59.9
> 640x480 60.0 59.9
> 720x400 70.1
> VIRTUAL1 disconnected (normal left inverted right x axis y axis)
>
> And here's the log with -v playback from when TV was off during boot.
>
> http://pastebin.com/wBxuCP2M
>
> As you can see in the second of these log outputs it is playing the
> video at 30fps, but earlier it correctly detects that the video is
> 25fps. Why? What can I do to get it to play at the correct speed?
>
> Many thanks,
> Andrew
>
>
What video adapter do you have?
I have had problems in the past of recordings playing at the wrong
speed. I switched to an NVidia display adapter and use vdpau and have
not had the problem since. I use the $20 Nvidia GeForce 210.
Peter
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.mythtv.org/pipermail/mythtv-users/attachments/20141111/36f76334/attachment.html>
More information about the mythtv-users
mailing list