[mythtv-users] Trouble recognizing Hauppauge 350 remote

[Hika van den Hoven]

Hoi Craig,

Wednesday, March 26, 2014, 8:58:21 PM, you wrote:

> On Wed, Mar 26, 2014 at 1:44 PM, Craig Huff <huffcslists at gmail.com>wrote:

> I have used this in the past and keep it around as a backup spare
> remote.  I am in the midst of updating my MythTV Backend and was
> testing that all the remotes are being recognized, but this one
> fails to yield any results when irw is running.  Other remotes work.
> When I look at raw data from my USB IR receiver (iguanaIR), I can
> see that this one is transmitting data.  I have looked at all the
> various lircd.conf.hauppauge files I have saved and the
> Hauppauge_350 data is consistent and matches (cursory examination)
> that shown on the lirc.org website.
>   

> In short, I know the remote is transmitting, the receiver is
> receiving the signal, but lirc isn't having any of it.  This is on
> Mythbuntu 12.04, updated at least through last weekend.


> Can anyone suggest something to look at or test?  I've run out of ideas.
>   
> --

> Craig.

>  




> One thought -- Could this have anything to do with the fact that
> the remote that works is RC6 and the one that is acting up is RC5? 
> (For further reference, my Mythbuntu 10.04 system sees both remotes.)
>  
> --


> Craig


How long ago was it that it worked and with what kernel version.
At present with the drivers in kernel, you have to use the input event
driver (dev/input/event*) with the PVR350, not the /dev/lirc

Tot mails,
  Hika                            mailto:hikavdh at gmail.com

"Zonder hoop kun je niet leven
Zonder leven is er geen hoop
Het eeuwige dilemma
Zeker als je hoop moet vernietigen om te kunnen overleven!"

De lerende Mens
--