[mythtv-users] Still trying to get Ceton InfiniTV working

[Kevin Calvert]

I've since moved the card back into my linux box, so the access is through
the web interface. But the following is what happens when I set the channel
to an hd channel then start the stream....

Jan  1 19:09:51 ocur[21]: ocur: [0] Attempting to SetChannel (Channel=802
 SourceId=0  Mode=0)
Jan  1 19:09:51 ocur[21]: ocur: Disabled table monitor for instance 0
Jan  1 19:09:51 ocur[21]: ocur: [0] Program number set to 0, was 0
Jan  1 19:09:51 ocur[21]: ocur: [0] Tune to 802 (mod=q256, freq=297000,
program=2203, std=9)
Jan  1 19:09:51 ocur[21]: ocur: [0] Program number set to 2203, was 0
Jan  1 19:09:51 ocur[21]: ocur: Disabled table monitor for instance 0
Jan  1 19:09:51 ocur[21]: ocur: [0] Locked: 1 Acc E: 0
Jan  1 19:09:51 ocur[21]: ocur: [0] Tune finished to freq 297000
Jan  1 19:09:51 ocur[21]: ocur: [0] Getting pmt for program 2203
Jan  1 19:09:52 ocur[21]: ocur: [0] Got pmt for program# 2203
Jan  1 19:09:52 ocur[21]: ocur: [0] Adding pid 0x0030
Jan  1 19:09:52 ocur[21]: ocur: [0] Adding pid 0x0031
Jan  1 19:09:52 ocur[21]: ocur: [0] Adding pid 0x0032
Jan  1 19:09:52 ocur[21]: upnp: Event(tuner[0]): PCRLock, "1"
Jan  1 19:09:52 ocur[21]: ocur: [0] Adding pid 0x0000
Jan  1 19:09:52 ocur[21]: ocur: [0] Adding pid 0x07c0
Jan  1 19:09:52 ocur[21]: ocur: [0] Adding pid 0x0430
Jan  1 19:09:52 ocur[21]: ocur: [0] Adding pid 0x07c1
Jan  1 19:09:52 ocur[21]: ocur: [0] Adding pid 0x07c2
Jan  1 19:09:52 ocur[21]: ocur: [0] Adding pid 0x07c3
Jan  1 19:09:52 ocur[21]: ocur: [0] Adding pid 0x07c4
Jan  1 19:09:52 ocur[21]: ocur: Disabled table monitor for instance 0
Jan  1 19:09:52 ocur[21]: ocur: Enabled table monitor for instance 0
Jan  1 19:09:52 ocur[21]: ocur: [0] Channel is scrambled, expecting CCI
Jan  1 19:09:52 ocur[21]: ocur: [0] Sending ca_pmt to CableCARD for program
number 2203 index 0
Jan  1 19:09:52 ocur[21]: ocur: [0] CCI 02 arrived for program# 2203
Jan  1 19:11:36 ocur[21]: ocur: [0] Program number set to 65535, was 2203
Jan  1 19:11:36 ocur[21]: libctn91xx: Clearing pid filter on 4
Jan  1 19:11:36 ocur[21]: ocur: Disabled table monitor for instance 0
Jan  1 19:11:36 ocur[21]: ocur: [0] Locked: 1 Acc E: 0
Jan  1 19:12:24 ocur[21]: ocur: [0] stream request 192.168.200.2:8000
start:1 prot: 0
Jan  1 19:12:24 ocur[21]: upnp: Event(cm[0]): CurrentConnectionIDs, "0"
Jan  1 19:12:24 ocur[21]: ocur: [0] Sending RTP setup message with
hdr_included=0
Jan  1 19:12:24 ocur[21]: ocur: [0] rtp setup for client 192.168.200.2:8000


*Kevin*

Eleven Three Labs LLC
eleventhree.com



On Wed, Jul 9, 2014 at 4:11 PM, Greg Thompson <gthompson20 at gmail.com> wrote:

>
>
> On Jul 9, 2014, at 4:07 PM, Kevin Calvert <kevin at eleventhree.com> wrote:
>
> It does, but the Ceton diag tool within Windows shows everything as green.
> It didn't originally, saying something along the lines that it needed a
> "hit" or "refresh" from comcast, which I called and had them do and that
> went from red to green after.
>
> So, as far as I know, everything's good.
>
>
> *Kevin*
>
> Eleven Three Labs LLC
> eleventhree.com
>
>
> What happens when you tune a channel in the Ceton diagnostics tool ? Does
> it say received entitlement ok ? If not comcast has an issue with the
> pairing.
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://www.mythtv.org/mailman/listinfo/mythtv-users
> http://wiki.mythtv.org/Mailing_List_etiquette
> MythTV Forums: https://forum.mythtv.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.mythtv.org/pipermail/mythtv-users/attachments/20140709/ce8dc4a6/attachment.html>