[mythtv-users] Channel change script works, but not in mythtv

[Raymond Norton]

> Hi,
>
> Here's one.
>
> I'd look at your backend log for clues. Even better, do the following:
>
>     mythbackend --setverbose system,channel
>
> (to a running backend) 1st. Then attempt a channel change. You know it
> will fail, but then look at the log to see if the expected command and
> correct channel got executed.
>

Thank you.. That revealed enough info to figure things out.

My tuner is set to channel 13 for the STB. frequency 211250

I had the tuned and start channel both set to 13 (set up before lirc was 
configured).

The scripts will take up to 3 digits per request, hence, why it was 
ending up on channel 250.

Leaving it tuned to 13, but setting the last channel to one that was 
configured properly got things working.


Thank you for the help

-- 
Raymond Norton
LCTN
952.955.7766

Sent from My Desktop