[mythtv-users] Ceton PCIe / No liveTV / (TL_) Partial Lock

[nonsense email]

Here is my ceton log.  I got this when I tuned a channel in the tuner log.
 I see the PMT but no PAT.

Jan  1 15:03:28 ocur[21]: ocur: [0] Attempting to SetChannel (Channel=211
 SourceId=0  Mode=0)
Jan  1 15:03:28 ocur[21]: ocur: Disabled table monitor for instance 0
Jan  1 15:03:28 ocur[21]: ocur: [0] Program number set to 0, was 3
Jan  1 15:03:28 ocur[21]: ocur: [0] Tune to 211 (mod=q256, freq=525000,
program=3, std=9)
Jan  1 15:03:28 ocur[21]: ocur: [0] Program number set to 3, was 0
Jan  1 15:03:28 ocur[21]: ocur: Disabled table monitor for instance 0
Jan  1 15:03:28 ocur[21]: ocur: [0] Locked: 1 Acc E: 0
Jan  1 15:03:28 ocur[21]: ocur: [0] Getting pmt for program 3
Jan  1 15:03:28 ocur[21]: ocur: [0] Adding pid 0x0000
Jan  1 15:03:28 ocur[21]: ocur: [0] Got pmt for program# 3
Jan  1 15:03:28 ocur[21]: ocur: [0] Adding pid 0x1ffc
Jan  1 15:03:28 ocur[21]: ocur: [0] Adding pid 0x0f40
Jan  1 15:03:28 ocur[21]: ocur: [0] Adding pid 0x0f50
Jan  1 15:03:28 ocur[21]: ocur: [0] Adding pid 0x0f60
Jan  1 15:03:28 ocur[21]: ocur: [0] Adding pid 0x0f70
Jan  1 15:03:28 ocur[21]: upnp: Event(tuner[0]): PCRLock, "1"
Jan  1 15:03:28 ocur[21]: ocur: [0] Adding pid 0x0f61
Jan  1 15:03:28 ocur[21]: ocur: [0] Adding pid 0x0f62
Jan  1 15:03:28 ocur[21]: ocur: [0] Adding pid 0x0f63
Jan  1 15:03:28 ocur[21]: ocur: Disabled table monitor for instance 0
Jan  1 15:03:28 ocur[21]: ocur: Enabled table monitor for instance 0
Jan  1 15:03:28 ocur[21]: ocur: [0] Channel is clear
Jan  1 15:03:29 ocur[21]: ocur: [0] Sending ca_pmt to CableCARD for program
number 3 index 0
Jan  1 15:03:30 ocur[21]: ocur: [0] CCI 00 arrived for program# 3


On Sat, Jan 4, 2014 at 10:55 AM, nonsense email <nonsense.junk at gmail.com>wrote:

> Karl,
> I looked into your statement about no data reaching MythTV.  I didn't know
> what the TL_ meant.  I didn't know what a good statement was.  I was under
> the impression that you shouldn't have any messages and that was when you
> got a picture.  I did a HLS with MythTV and saw that getting TLAM was when
> I got a picture.  I used the links on wiki page you posted and saw that I
> was missing the A and M and saw that meant exactly what you posted.  No
> PAT/PMT.  Now I need to look into that.  Thanks.
>
>
> On Thu, Jan 2, 2014 at 7:01 PM, Karl Dietz <dekarl at spaetfruehstuecken.org>wrote:
>
>> On 03.01.2014 00:22, Joseph DeGraw wrote:
>>
>>> I think the thing to look at is the "partial lock" that the OP is
>>> getting. That is strange. Perhaps something came lose - that little
>>> cable on the back worries me as its quite flimsy.
>>>
>>
>> Does it work with mplayer? (on Linux)
>> http://www.mythtv.org/wiki/Ceton_InfiniTV_4#Test-Driving_a_Channel
>>
>> TL_ hints that no data is reaching MythTV (no PAT/PMT seen at all)
>> http://www.mythtv.org/wiki/Channel_tuning
>>
>> Regards,
>> Karl
>>
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users at mythtv.org
>> http://www.mythtv.org/mailman/listinfo/mythtv-users
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.mythtv.org/pipermail/mythtv-users/attachments/20140104/ed2254c8/attachment.html>