[mythtv-users] Joy and pain (Daryl McDonald)

[Daryl McDonald]

On Thu, Feb 13, 2014 at 8:29 PM, Hika van den Hoven <hikavdh at gmail.com>wrote:

>  Hoi Daryl,
>
>
> Friday, February 14, 2014, 1:59:20 AM, you wrote:
>
>
>
>
>
>
> On Thu, Feb 13, 2014 at 5:17 PM, Hika van den Hoven <hikavdh at gmail.com>
> wrote:
> Hoi Daryl,
>
>
> Thursday, February 13, 2014, 10:58:50 PM, you wrote:
>
>
>
>
>
> On 2014-02-13 4:35 PM, "Hika van den Hoven" <hikavdh at gmail.com> wrote:
> >
> > Hoi Daryl
> >
> > Can you post the result of 'lsmod | grep lirc' when the new card is in.
> > It should contain lirc_dev and lirc_serial any extras are probably from
> the new card.
> >
> daryl at daryl-A780L3C:~$ lsmod | grep lirc
> ir_lirc_codec          12860  0
> lirc_dev               19205  1 ir_lirc_codec
> rc_core                26423  12
> ir_lirc_codec,ir_mce_kbd_decoder,ir_sanyo_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,ir_nec_decoder,rc_pinnacle_pctv_hd,cx23885,cx88xx
> daryl at daryl-A780L3C:~$
>  >
> > Tot mails,
> >   Hika                            mailto:hikavdh at gmail.com
> >
> >
> > "Zonder hoop kun je niet leven
> > Zonder leven is er geen hoop
> > Het eeuwige dilemma
> > Zeker als je hoop moet vernietigen om te kunnen overleven!"
> >
> > De lerende Mens
> > --
> >
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://www.mythtv.org/mailman/listinfo/mythtv-users
> > http://wiki.mythtv.org/Mailing_List_etiquette
> > MythTV Forums: https://forum.mythtv.org
> >
> OK, I will get to this when I get back home, a little later. How would I
> go anout blacklisting the other module? I can't see ever using it, unless I
> do a total rebuild, this box is full.   Daryl
>
>
>
> First check what lirc modules are loaded. The general module is lirc_dev.
> Your blaster user lirc_serial and your new card probably uses lirc_i2c or
> lirc_gpio.
> Then in /etc/modprobe.d/ check for a file 'blacklist' if it doesn't exist
> create it:
> 'touch /etc/modprobe.d/blacklist'.
> in the file create a line 'blacklist lirc_i2c' or 'blacklist lirc_gpio'
> depending on
> what you find with 'lsmod | grep lirc'.
> Then after a reboot check again with lsmod if the module hasn't loaded. If
> I'm correct
> you then only have /dev/lirc0 and the irblaster will work again. Don't
> forget to reset
> '/etc/lirc/hardware.conf' to its old state and using /dev/lirc0.
>
> Tot mails,
>   Hika                            mailto:hikavdh at gmail.com<hikavdh at gmail.com>
>
>
> "Zonder hoop kun je niet leven
> Zonder leven is er geen hoop
> Het eeuwige dilemma
> Zeker als je hoop moet vernietigen om te kunnen overleven!"
>
> De lerende Mens
> --
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://www.mythtv.org/mailman/listinfo/mythtv-users
> http://wiki.mythtv.org/Mailing_List_etiquette
> MythTV Forums: https://forum.mythtv.org
>
>
>
>
> This is when you turned of the autoloading? 'LOAD_MODULES="false"'?
> Because I'm missing lirc_serial.
> ir_core is I assume needed
> ir_lirc_codec are all the protocols to communicate with different devices.
> Turn autoloading on and insert the new card. You then should get more.
>
>
> Tot mails,
>   Hika                            mailto:hikavdh at gmail.com<hikavdh at gmail.com>
>
>
> "Zonder hoop kun je niet leven
> Zonder leven is er geen hoop
> Het eeuwige dilemma
> Zeker als je hoop moet vernietigen om te kunnen overleven!"
>
> De lerende Mens
> --
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://www.mythtv.org/mailman/listinfo/mythtv-users
> http://wiki.mythtv.org/Mailing_List_etiquette
> MythTV Forums: https://forum.mythtv.org
>
> LOAD_MODULES ="true", but TRANSMITTER_DEVICE="/dev/lircSerial", should
this one go back to "/dev/lirc0"?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.mythtv.org/pipermail/mythtv-users/attachments/20140213/a718282a/attachment.html>