[mythtv-users] Ceton InfiniTV 6 ETH records limited channels

Tue Feb 4 12:53:59 UTC 2014

Steven,

It sounds like either your cable card is not paired correctly, or it is
 and is in fact Decrypting the stream, but the channel is marked as Copy
Once. In Either case the Web Site for the Tuner is invaluable in figuring
out which one is going on. Put the IP of the Tuner in your browser and
first check the Cable Card Tab to make sure it shows as paired correctly,
then go to a tuner tab and tune a channel you can't get and look for the
Copy Freely / Copy Once flag.

(Sorry going off memory here so I can be more precise)

Greg

On Tue, Feb 4, 2014 at 4:43 AM, Stephen Baker <stephen at wildwood.baker.org>wrote:

>  On Mon, 2014-02-03 at 15:36 -0600, Stephen Baker wrote:
>
> I am getting limited success from the Ceton InfiniTV 6 ETH.  I am able to
> record only two channels.  It is immaterial which receiver is used to
> record those channels.  All the other channels provide a zero-length
> recording.  I have been able to observe the InfiniTV sending multiple UDP
> streams simultaneously, corresponding to each receiver.  Through the logs,
> I have correlated that the stream is on the UDP port requested during the
> recording setup.  I'm at a loss to determine why other channels are not
> recording.
>
> Thanks to the debugging information (-v channel,record,siparser), I've
> been able to determine that most channels are encrypted.  There are two
> channels that are not.  Now, I need to determine why the InfiniTV is not
> decrypting.
>
> Encrypted channel:
> 2014-02-04 02:22:28.102160 D [32114/32183] CetonStreamHandler
> recorders/signalmonitor.cpp:220 (AddFlags) -
> SigMon[1](192.168.200.3-RTP.0)::AddFlags: Seen(PMT,) Match() Wait()
> 2014-02-04 02:22:28.102271 N [32114/32183] CetonStreamHandler
> recorders/dtvsignalmonitor.cpp:367 (HandlePMT) -
> DTVSigMon[1](192.168.200.3-RTP.0): *PMT says program 10 is encrypted*
> 2014-02-04 02:22:28.102395 D [32114/32183] CetonStreamHandler
> recorders/signalmonitor.cpp:220 (AddFlags) -
> SigMon[1](192.168.200.3-RTP.0)::AddFlags: Seen() Match() Wait(Crypt,)
> 2014-02-04 02:22:28.102413 D [32114/32183] CetonStreamHandler
> recorders/signalmonitor.cpp:220 (AddFlags) -
> SigMon[1](192.168.200.3-RTP.0)::AddFlags: Seen() Match(PMT,) Wait()
> 2014-02-04 02:22:28.102429 I [32114/32183] CetonStreamHandler
> mpeg/mpegstreamdata.cpp:512 (CreatePMTSingleProgram) -
> MPEGStream[1](0x7fa7980154a0): CreatePMTSingleProgram()
> 2014-02-04 02:22:28.102445 I [32114/32183] CetonStreamHandler
> mpeg/mpegstreamdata.cpp:513 (CreatePMTSingleProgram) -
> MPEGStream[1](0x7fa7980154a0): PMT in input stream
> 2014-02-04 02:22:28.102975 I [32114/32183] CetonStreamHandler
> mpeg/mpegstreamdata.cpp:514 (CreatePMTSingleProgram) -
> MPEGStream[1](0x7fa7980154a0): Program Map Section
>  PSIP tableID(0x2) length(116) extension(0xa)
>       version(25) current(1) section(0) last_section(0)
>       pnum(10) pid(0x30)
>   *Conditional Access: sid(0x4749) pid(0x430) data_size(0)*
>   Registration Descriptor: 'CUEI' SCTE 35 2003, Cable Digital Program
> Insertion Cueing Message
>   Stream #0 pid(0x7c0) type(0x80 video-opencable)
>     UKChannelListDescriptor sid->chan_num:
>     Caption Service Descriptor  services(2)
>      lang(eng) type(0) easy_reader(0) wide(0) line_21_field(0)
>      lang(eng) type(1) easy_reader(0) wide(0) service_num(1)
>     Data Stream Alignment Descriptor (0x06) length(1)
>   Stream #1 pid(0x7c1) type(0x81 audio-ac3)
>     ISO-639 Language: code(eng) canonical(eng) eng(English)
>     Audio Stream Descriptor  full_srv(1) sample_rate(48kbps or 44.1kbps)
> bit_rate(<=640kbps, 50)
>       bsid(8) bs_mode(0) channels(<= 6) Dolby(Not indicated)
>       mainID(7) isLatin-1(false) text_length(97) text(TODO)
>   Stream #2 pid(0x7c2) type(0x81 audio-ac3)
>     ISO-639 Language: code(spa) canonical(spa) eng(Spanish; Castilian)
>     Audio Stream Descriptor  full_srv(1) sample_rate(48kbps or 44.1kbps)
> bit_rate(<=640kbps, 50)
>       bsid(8) bs_mode(0) channels(<= 6) Dolby(Not indicated)
>       mainID(7) isLatin-1(true) text_length(97) text(TODO)
>   Stream #3 pid(0x7c3) type(0x86 splice)
>   Stream #4 pid(0x7c4) type(0xc0 unknown)
>     Registration Descriptor: 'ETV1' CableLabs ETV info is present
>     ATSC Time-shifted Service Descriptor (0xa2) length(1)
>   Stream #5 pid(0x7c5) type(0xc0 unknown)
>     Registration Descriptor: 'ETV1' CableLabs ETV info is present
>     Service Location Descriptor (0xa1) length(1)
>
> Unencrypted channel:
> 2014-02-04 02:50:30.052911 D [32114/32299] CetonStreamHandler
> recorders/signalmonitor.cpp:220 (AddFlags) -
> SigMon[2](192.168.200.3-RTP.1)::AddFlags: Seen(PMT,) Match() Wait()
> 2014-02-04 02:50:30.052972 D [32114/32299] CetonStreamHandler
> recorders/signalmonitor.cpp:220 (AddFlags) -
> SigMon[2](192.168.200.3-RTP.1)::AddFlags: Seen() Match(PMT,) Wait()
> 2014-02-04 02:50:30.052988 I [32114/32299] CetonStreamHandler
> mpeg/mpegstreamdata.cpp:512 (CreatePMTSingleProgram) -
> MPEGStream[2](0x7fa79001ddc0): CreatePMTSingleProgram()
> 2014-02-04 02:50:30.052997 I [32114/32299] CetonStreamHandler
> mpeg/mpegstreamdata.cpp:513 (CreatePMTSingleProgram) -
> MPEGStream[2](0x7fa79001ddc0): PMT in input stream
> 2014-02-04 02:50:30.053072 I [32114/32299] CetonStreamHandler
> mpeg/mpegstreamdata.cpp:514 (CreatePMTSingleProgram) -
> MPEGStream[2](0x7fa79001ddc0): Program Map Section
>  PSIP tableID(0x2) length(32) extension(0xa)
>       version(23) current(1) section(0) last_section(0)
>       pnum(10) pid(0x3a)
>   Stream #0 pid(0xa40) type(0x80 video-opencable)
>     UKChannelListDescriptor sid->chan_num:
>   Stream #1 pid(0xa41) type(0x81 audio-ac3)
>     ISO-639 Language: code(eng) canonical(eng) eng(English)
>
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.mythtv.org/pipermail/mythtv-users/attachments/20140204/92bd121a/attachment.html>