[mythtv-users] Ceton Infinitv ETH 6 configuration

[gthompson20 at gmail.com]

Hey Ron,


I wanted to give your some info on this issue... as I am having it as well with an Network Connected USB Tuner.... I can also send manua requests to stream to the VLC from the Web Page, However when I try and use Myth I get a Partial Lock... Tracing the logs like you asked give the following results...


The web page still appears to give the correct JSON when watching with Firebig, However the issues appears to maybe be this command when Mythbackend Starts:


CetonSH (IP of Ceton) ClearProgramNumber()
Which shows the following in the Ceton LOGfile....


 libcetonrtsp: object cetonmpeg0
Jan  1 00:04:25 ocur[21]: ocur: [0] rtp setup for client 192.168.1.189:44778
Jan  1 00:04:26 ocur[21]: libcetontune: ERROR: Failed to set frequency on instance 0
Jan  1 00:04:26 ocur[21]: ocur: WARNING: [0] Frequency set did not take. Freq: 747000 Std 9
Jan  1 00:04:26 ocur[21]: ocur: WARNING: [0] Channel change failed
Jan  1 00:04:26 ocur[21]: ocur: [0] Getting pmt for program 3
Jan  1 00:04:30 ocur[21]: ocur: [0] Attempting to SetChannel (Channel=0  SourceId=0  Mode=0)
Jan  1 00:04:30 ocur[21]: ocur: WARNING: [0] Set channel in progress, saving channel number request 0
Jan  1 00:04:31 ocur[21]: mpeg: WARNING: [ID-0] Failed to get pat
Jan  1 00:04:31 ocur[21]: ocur: ERROR: [0] No pat returned
Jan  1 00:04:31 ocur[21]: ocur: [0] PCR Lock: 0
Jan  1 00:04:31 ocur[21]: ocur: [0] Packets: 0 (0 - 0) Data Ready 0
Jan  1 00:04:31 ocur[21]: mpeg: [ID-0] ready 00000100 pkts 00000101 filter 00000001 sections 00000101 no_filters 00000001 zero_pid 00000035
Jan  1 00:04:31 ocur[21]: libctn91xx: 0.6 read 00000101 comp 00000101
Jan  1 00:04:31 ocur[21]: mpeg: [ID-0] ready 00000100 pkts 00000101 filter 00000001 sections 00000101 no_filters 00000001 zero_pid 00000035
Jan  1 00:04:31 ocur[21]: libctn91xx: 0.6 read 00000101 comp 00000101


One the Tuner gets hit with that command I no longer see any program ID’s in the Tuner Page. Only way to return the tuner to normal operation is to power cycle the tuner.


I am using the latest Firmware, so I am guessing they have changed something on you...


Can you look into this?


Greg Thomson



Sent from Windows Mail
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.mythtv.org/pipermail/mythtv-users/attachments/20130830/28d7f411/attachment.html>