[mythtv-users] Hauppauge grey remote with homemade serial IR receiver in MythTV 0.26 and Fedora 19

[Stephen Worthington]

On Mon, 26 Aug 2013 20:29:52 +1000, you wrote:

>On 26 August 2013 20:23, Stephen Worthington <stephen_agent at jsw.gen.nz> wrote:
>
>> That rule is different - it will make a /dev/mceremote device, not a
>> /dev/lirc0 device.  So your remote was previously appearing as
>> /dev/lirc0 on its own without help from the udev rule, and now it is
>> probably not doing that.  Try either changing hardware.conf to:
>>
>>   REMOTE_DEVICE="/dev/mceremote"
>>
>> or changing the udev rule to SYMLINK+="lirc0".
>
>this only make /dev/mceremote a symlink to /dev/lirc0 (which can be
>useful if you have more than one lirc device)

Your hardware.conf currently requires a /dev/lirc0 device.  Your udev
rule is not creating that device, but is creating a /dev/mceremote
device.  The /dev/lirc0 device may be being created automatically by
something, but it would be best if you tied it all down using matching
udev rules and hardware.conf settings.  With your current config, do
you actually have a /dev/lirc0 device?  What does ls -al /dev/li*
show?