[mythtv-users] setting tuner priority to -1 completely disables it

Michael T. Dean mtdean at thirdcontact.com
Sun Nov 18 21:05:00 UTC 2012

On 11/17/2012 04:36 PM, Nick Rout wrote:
> On Fri, Nov 16, 2012 at 7:23 AM, Brian J. Murrell wrote:
>> Using 0.25-fixes...
>> I have 4 tuners, 2 digital (clearqam) and 2 analog where one of the
>> analogs is on analog cable directly and the other is connected to a DTA
>> (i.e. digital set top box).
>> I have added the tuners in the order that I want to utilize them which
>> is D1, D2, AD and AA representing the two digital clearqam tuners, the
>> one that records from the DTA and the pure analog one.
>> The AD and AA tuners have most of the same channels which is a super-set
>> of the channels on the D1 and D2 tuners.  The following concerns
>> programming only available on the AD and AA tuners so you can probably
>> disregard the D{1,2} tuners for the remainder of this report...
>> I have been finding situations in the scheduling where the AA tuner is
>> getting scheduled for a program that is available (only) on the AA and
>> AD tuners but when the AD tuner is available (typically it seems to have
>> been used in the prior timeslot when this happens).  This is contrary to
>> what I have read here many times over in that tuners are chosen in the
>> order they were added.

No, not with current MythTV.

>> So to try to force the use of the AD tuner whenever it's available, I
>> set the Input priority of the AA tuner to -1 hoping to force it to be
>> selected less.
>> That seems to have resulted in the AA tuner *never* being used, even
>> when there is a conflict on the AD tuner (for a program that is only
>> available to the AA and AD tuners, of course).
>> I've put the priority back to 0 and now both AD and AA are being used
>> but again, AA is being chosen in priority over AD at times when AD is
>> idle, but might have just had something scheduled on it in the previous
>> timeslot.  IOW, the scheduler seems to be trying to avoid back-to-back
>> recordings on a single tuner.
>> How do I resolve this?
> It is probably caused by overlap, ie the previous timeslot overlaps with
> the current one because we all put a bit extra o the start and end of our
> recording times. Therefore one tuner cannot cover both timeslots.

Or, perhaps you're confusing input priority (what you think you want) 
with Schedule/Live TV order of capture devices (what you should be 
using--rather than adding inputs in any particular order--to specify 
order of usage for recordings and Live TV)...

Chances are, setting the Schedule and Live TV order appropriately will 
fix all the problems and you don't need (nor want) any input priorities.


More information about the mythtv-users mailing list