[mythtv-users] Post upgrade 0.24 to 0.25 PVR-150/250/350 fail to record at some point

Tue May 8 21:19:26 UTC 2012

---- Michael Harnden <mike at rochestervball.com> wrote: 
> On Tuesday, May 08, 2012 11:36:35 AM Michael T. Dean wrote:
> > On 05/08/2012 07:44 AM, Michael Harnden wrote:
> > > Quoting Kenan Ezal:
> > >> Summary of problem:
> > >> 
> > >> After I reboot both my master backend and slave backend I schedule
> > >> recordings (that are currently on) to test my three tuners
> > >> (PVR-250/PVR-150 on master backend and PVR-350 on slave backend). All
> > >> three tuners record their respective shows and I am able to play back
> > >> during recording. I delete the shows and try again for a different
> > >> set of programs on different channels. Once again everything works
> > >> and I am pleased thinking my kids will be happy with the new Mickey
> > >> Mouse Clubhouse show that is scheduled to be recorded the next morning.
> > >> 
> > >> The following morning I wake up to find that the first show that was
> > >> scheduled for recording at 2am (Phineas and Ferb) recorded fine
> > >> although the backend did report a database error (see below).
> > >> However, the second show (Doc McStuffins at 7:30am) and the third
> > >> show (Mickey Mouse Club House at 8am) did not record, although they
> > >> show up in grey on my list of recordings. All three shows were
> > >> scheduled to use Tuner 1 (PVR-250).
> > >> 
> > >> I am puzzled so I sellect three other shows (such as the highly
> > >> provocative "Inside Edition: Butt Girl" and "Brazil Butt Lift") for
> > >> immediate recording. All three appear to be recording. However, when
> > >> I check Tuner 1 I see that it is not. I stop the recording on Tuner 1
> > >> (leaving the others recording) and try LiveTV and receive the
> > >> following error: "Error opening jump program buffer." The other two
> > >> tuners are in fact recording. However, I am able to recreate the same
> > >> issue with any of the tuners. For example, the other night I decided
> > >> to disable Tuner 1 so that Tuner 2 was the first in line to record.
> > >> The next morning same problem. I then disabled Tuners 1 and 2, and
> > >> the same problem occurred with Tuner 3 (on slave backend). They all
> > >> initially record fine, but fail during a later scheduled recording,
> > >> usually after successfully recording the first show.
> > >> 
> > >> Extended Discussion:
> > >> 
> > >> Unfortunately, this started about two weeks ago when I upgraded from
> > >> 0.24 to 0.25 on Fedora 16. I use ATrpms to access the packages. At
> > >> first I thought it was a power supply problem because we had been
> > >> having some power problems in our area and I found my master backend
> > >> completely off one morning. However, I believe that was a false alarm
> > >> and now it appears to be a software problem. The system was very
> > >> stable and recording away happily before the upgrade.
> > >> 
> > >> I have noted that other people have been reporting similar problems
> > >> with their PVRs although the descriptons vary a some and many seem to
> > >> be focused on LiveTV. We never watch LiveTV, always recorded shows so
> > >> I know it isn't a problem solely related to LiveTV.
> > >> 
> > >> See for exampe:
> > >> 
> > >> http://www.mythtv.org/pipermail/mythtv-users/2012-May/333121.html
> > >> https://bugs.archlinux.org/task/29627
> > >> 
> > >> I did discover that there is a possible fix, but I"m not sure when
> > >> its going to get into the packages:
> > >> 
> > >> https://github.com/MythTV/mythtv/commit/f81f712537b63502814d1f274c7da1419
> > >> 6cedd8c
> > >> 
> > >> 
> > >> However, I'm not completely convinced that is the only problem on my
> > >> system since I can't seem to make it fail on will. It's repeatable in
> > >> that after a reboot, it will happen (probably overnight).
> > >> 
> > >> 1. I'm curious if anyone else has had similar issues and was able to
> > >> fix it without the above mentioned fix (I did try deleting all the
> > >> tuners and inputs and adding them back in and it did not help).
> > >> 
> > >> snip
> > > 
> > > I can add a "me too". Upgraded from 0.24 to 0.25 last night using
> > > Mythbuntu. My PVR-350 now exhibits the same behavior. It will work
> > > once following a reboot. I can watch live tv once, then failure, or
> > > record one show, then failure.
> > > 
> > > Log;
> > > 
> > > May  8 07:29:25 mythtv-server mythbackend[1930]: I TVRecEvent
> > > tv_rec.cpp:1521 (HandlePendingRecordings) TVRec(1): ASK_RECORDING 1 23
> > > 0 0
> > > 
> > > May  8 07:29:49 mythtv-server mythbackend[1930]: I TVRecEvent
> > > tv_rec.cpp:1014 (HandleStateChange) TVRec(1): Changing from None to
> > > RecordingOnly
> > > 
> > > May  8 07:29:49 mythtv-server mythbackend[1930]: I TVRecEvent
> > > tv_rec.cpp:3459 (TuningCheckForHWChange) TVRec(1): HW Tuner: 1->1
> > > 
> > > May  8 07:29:49 mythtv-server mythbackend[1930]: I TVRecEvent
> > > v4lchannel.cpp:661 (SetInputAndFormat) V4LChannel(/dev/video0):
> > > SetInputAndFormat(2, NTSC) (v4l v2) input_switch: 0 mode_switch: 0
> > > 
> > > May  8 07:29:49 mythtv-server mythbackend[1930]: N Scheduler
> > > autoexpire.cpp:263 (CalcParams) AutoExpire: CalcParams(): Max required
> > > Free Space: 2.0 GB w/freq: 15 min
> > > 
> > > May  8 07:29:49 mythtv-server mythbackend[1930]: I Scheduler
> > > scheduler.cpp:2459 (HandleRecordingStatusChange) Tuning recording:
> > > "College Football Live": channel 1216 on cardid 1, sourceid 1
> > > 
> > > May  8 07:29:50 mythtv-server mythbackend[1930]: I Scheduler
> > > scheduler.cpp:2459 (HandleRecordingStatusChange) Started recording:
> > > "College Football Live": channel 1216 on cardid 1, sourceid 1
> > > 
> > > May  8 07:29:50 mythtv-server mythbackend[1930]: I TVRecEvent
> > > tv_rec.cpp:3953 (TuningNewRecorder) TVRec(1): rec->GetPathname():
> > > '/mnt/store/d4/video/1216_20120508073000.mpg'
> > > 
> > > May  8 07:29:53 mythtv-server mythbackend[1930]: E DeviceReadBuffer
> > > DeviceReadBuffer.cpp:513 (Poll) DevRdB(/dev/video0): Poll giving up 2
> > > 
> > > May  8 07:29:53 mythtv-server mythbackend[1930]: E RecThread
> > > mpegrecorder.cpp:1010 (run) MPEGRec(/dev/video0): Device error detected
> > > 
> > > I will dig into this a bit more when I get home from work tonight.
> > 
> > Did you guys do a "Delete all capture cards" (not "Delete all capture
> > cards on <hostname>"), then re-create cards and re-connect inputs?  (Any
> > time you change cards or drivers, you should probably do that--and
> > should definitely do that if you have failures after the upgrade.)  It
> > won't affect Video Sources or channels, so, it's a quick 30-second
> > process that allows MythTV to configure your cards for the current drivers.
> > 
> > Mike
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://www.mythtv.org/mailman/listinfo/mythtv-users
> Hi Mike,
> I ran "Delete all capture cards" and had the same results (recording failure). 
> After some more googling, I shut my server down (not just a reboot), waited a 
> minute or so and restarted. So far I have been able to record 5 separate times 
> on that tuner. So I think I am good. I'll observe for a couple of days and 
> report back.
> 
> I managed to break live TV in my Delete all cards process, so I am off to 
> investigate that.
> Mike

Mike,

When you say you were able to record 5 seperate times, do you mean that you manually told
the tuner to to record a show, stopped the recording, and told it to record another show, possibly
on another channel? [Or were these previously scheduled recordings?]

If so, I was able to do the same thing, but after leaving the machine with previously scheduled
programs, the first scheduled program fails to record. For example, after a reboot,
I went into Manage Recordings and selected a currently running program for recording. It would
successfully record. I would stop the recording and go to another channel and do the same thing
with another program. Once again no problem. However, after thinking everything is Ok I would come
back the next morning to find an empty file for a previously scheduled recording using that same tuner.

I was wondering if there is something related to the scheduler going on...?

However, tonight I will try complete shutdown of both machines after I remove my cards from setup. I will
then re-select the cards after starting the machine and see what happens. I may also shutdown after
re-selecting. I'll try anything now...

-Kenan

-Kenan