[mythtv-users] pcHDTV HD-3000 won't tune in 12.04
Bob Hurt
linux at planethurt.com
Sun Jun 10 18:51:30 UTC 2012
last month i made the jump from Mythbuntu 8.10 and MythTV .21 to
Mythbuntu 12.04 and .25. i have two HDHomeRun tuners and two old pcHDTV
HD-3000 cards, and the latter seem to be recognized just fine but will
not tune in any channels at all. i compared the output of lspci from
the 8.10 setup to what i have now and it seems pretty much the same,
particularly the kernel driver. mythtv-setup lets me select the HD-3000
tuners but they are never able to record anything.
here's the output from "sudo lspci -vvnn" :
>>>
00:08.0 Multimedia video controller [0400]: Conexant Systems, Inc.
CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: pcHDTV pcHDTV HD3000 HDTV [7063:3000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Unknown large resource type 60, will not decode more.
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: cx8800
Kernel modules: cx8800
00:08.2 Multimedia controller [0480]: Conexant Systems, Inc.
CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05)
Subsystem: pcHDTV pcHDTV HD3000 HDTV [7063:3000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e3000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: cx88-mpeg driver manager
Kernel modules: cx8802
<<<
any suggestions on what i might try to get them working?
--Bob
More information about the mythtv-users
mailing list