[mythtv-users] problem with dvico remote in mythbuntu

Anthony Giggins seven at seven.dorksville.net
Fri Feb 24 12:23:22 UTC 2012


I believe the issue is the the remote is being detected as a hiddevice, but
everything I've tried with lirc 0.9.0 and kernel 3.0.0-14 hasn't worked

logging when unplugging the device

Feb 24 22:10:29 mythlappy lircd-0.9.0[28746]: error reading
'/dev/usb/hiddev0'
Feb 24 22:10:29 mythlappy lircd-0.9.0[28746]: Input/output error
Feb 24 22:10:29 mythlappy lircd-0.9.0[28746]: closing '/dev/usb/hiddev0'
Feb 24 22:10:29 mythlappy kernel: [2556964.240089] usb 3-2: USB disconnect,
device number 2
Feb 24 22:10:36 mythlappy kernel: [2556971.600059] usb 3-2: new low speed
USB device number 3 using uhci_hcd
Feb 24 22:10:36 mythlappy kernel: [2556971.805921] generic-usb
0003:0FE9:9010.0002: hiddev0,hidraw0: USB HID v1.10 Device [DVICO DVICO USB
HID Remocon V1.00] on usb-0000:00:1d.1-2/input0
Feb 24 22:10:36 mythlappy mtp-probe: checking bus 3, device 3:
"/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2"
Feb 24 22:10:36 mythlappy mtp-probe: bus: 3, device: 3 was not an MTP device

from hardware.conf
REMOTE="DViCO USB Remote"
REMOTE_MODULES=""
REMOTE_DRIVER="dvico"
#REMOTE_DEVICE="/dev/lirc0"
#REMOTE_DEVICE="/dev/hidraw0"
REMOTE_DEVICE="/dev/usb/hiddev0"
REMOTE_SOCKET="/var/run/lirc/lircd"
#REMOTE_LIRCD_CONF="dvico/lircd.conf.fusionHDTV"
REMOTE_LIRCD_CONF="dvico/lircd.conf.DVICOcustom"

irw gives nothing

mode2 gives nothing

ir-keytable -t gives nothing

Please help

just testing this as a secondary frontend

Cheers,

Anthony
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.mythtv.org/pipermail/mythtv-users/attachments/20120224/e21fe971/attachment.html 


More information about the mythtv-users mailing list