[mythtv-users] Channel scan doesn't work

schlimbo at gmx.de schlimbo at gmx.de
Wed Dec 19 19:46:59 UTC 2012


Thanks for the tip.
I tried kaffeine and the same thing happens: I get "tuning failed" when scanning. 

I have no idea how to proceed from here. Anyone have an idea what I could try to find the issue? Anyone has a similar HW-config?

Thanks

frank

-------- Original-Nachricht --------
> Datum: Wed, 19 Dec 2012 19:27:46 +0000
> Von: Jksj <jksjdevelop at gmail.com>
> An: Discussion about MythTV <mythtv-users at mythtv.org>
> Betreff: Re: [mythtv-users] Channel scan doesn\'t work

> On 19/12/12 09:09, schlimbo at gmx.de wrote:
> > Hi,
> > I am currently trying to switch from DVB-T to DVB-S. I installed a
> brand-new mythbuntu (with mythtv-0.25). It finds my DD cine s2 fine; I can't see
> any issues with dmesg, all looks good. However, neither the scan in mythtv
> not the command-line scans work.
> >
> > I am using a quatro-lnb attached to a 5/8 multiswitch, telling Mythtv
> each tuner is attached to a LNB.
> >
> > Using ZDF (for Astra) 11954000/hor/27500000 in mythtv-setup shows "no
> lock", signal strength 80%, signal/noise 74% for a while and then quits
> scanning without finding anything and reports a timeout.
> >
> > The scan tool shows the following:
> >
> > myth at mythserver:~$ sudo scan /usr/share/dvb/dvb-s/Astra-19.2E
> > scanning /usr/share/dvb/dvb-s/Astra-19.2E
> > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> > initial transponder 12551500 V 22000000 5
> >>>> tune to: 12551:v:0:22000
> > DVB-S IF freq is 1951500
> > WARNING: >>> tuning failed!!!
> >>>> tune to: 12551:v:0:22000 (tuning failed)
> > DVB-S IF freq is 1951500
> > WARNING: >>> tuning failed!!!
> > ERROR: initial tuning failed
> > dumping lists (0 services)
> > Done.
> >
> > Any idea, suggestions?
> >
> > frank
> >
> >
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://www.mythtv.org/mailman/listinfo/mythtv-users
> The easiest way, I have found to get dvb-s going is to test it first 
> using Kaffeine --kill mythbackend first .Kaffeine seems to have the 
> simplest satellite setup mechanism and it will at least prove the card, 
> driver and dish are working before trying to set up Myth.
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://www.mythtv.org/mailman/listinfo/mythtv-users


More information about the mythtv-users mailing list