[mythtv-users] imon remote changes

[Phil Wild]

Hi all,

I am having issues with my imon remote configuration after upgrading
to ubuntu 12.04 LTS
Actually to clarify... Not an upgrade but a complete new install of my frontend.

I am running a Zotac ION board and have an Antec MicroFusion 350 case
with inbuilt LCD and IR receiver.

lsusb shows:

     15c2:0038 SoundGraph Inc. GD01 MX LCD Display/IR Receiver

I have read through the docs re changes required and have tried to
follow instruction. Have spent all night googling as well.

I am running a Harmony One remote with the profile set as an MCE USB remote.

My /etc/lirc/hardware.conf file is configured as follows:

#Chosen Remote Control
REMOTE="Linux input layer (/dev/input/eventX)"
REMOTE_MODULES=""
REMOTE_DRIVER="devinput"
REMOTE_DEVICE="/dev/input/by-id/usb-15c2_0038-event-if00"
REMOTE_SOCKET=""
REMOTE_LIRCD_CONF="devinput/lircd.conf.devinput"
REMOTE_LIRCD_ARGS=""

#Chosen IR Transmitter
TRANSMITTER="None"
TRANSMITTER_MODULES=""
TRANSMITTER_DRIVER=""
TRANSMITTER_DEVICE=""
TRANSMITTER_SOCKET=""
TRANSMITTER_LIRCD_CONF=""
TRANSMITTER_LIRCD_ARGS=""
START_LIRCD="true"
LOAD_MODULES="false"
LIRCMD_CONF=""
FORCE_NONINTERACTIVE_RECONFIGURATION="false"
START_LIRCMD=""

My /etc/lircd.conf file contains

#Configuration for the Linux input layer (/dev/input/eventX) remote:
include "/usr/share/lirc/remotes/devinput/lircd.conf.devinput"

ir-keytable returns the following:

Found /sys/class/rc/rc0/ (/dev/input/event5) with:
        Driver imon, table rc-imon-pad
        Supported protocols: RC-6 other
        Enabled protocols:
        Repeat delay = 500 ms, repeat period = 125 ms

irw and ir-keytable do not pick up anything from my remote. Where have
I gone wrong?

Thanks in advance.

Phil