[mythtv-users] Hauppauge 2250 help?

[Greg]

  I have been trying to get this card going on the analog  side for over 
a week... It works just fine,using it for digital capture,but under 
analog it plays for about 1 second then gives me a blue screen and very 
loud audio.... I run an new enough kernel that the digital just works.. 
I downloaded the analog firmware and placed it in the /lib/firmware dir 
and it shows up in dmesg as loaded... If there's any thing I'm missing 
could someone point me in the right direction?  Under mythtv-setup I 
installed it as a mpeg2 device....
   I thought the card was bad,but I had a spare hard drive with Windows 
7 installed,so I plugged it in and installed the card and it work fine 
on both digital and analog...

Can anyone point me in the right direction?


39.080008] saa7164_downloadimage() Image downloaded, booting...
[   40.952010] saa7164_downloadimage() Image booted successfully.
[   40.952028] firmware download complete.
[   40.996507] tveeprom 0-0000: Hauppauge model 88061, rev C4F2, serial# 
7933934
[   40.996509] tveeprom 0-0000: MAC address is 00:0d:fe:79:0f:ee
[   40.996511] tveeprom 0-0000: tuner model is NXP 18271C2_716x (idx 
152, type 4)
[   40.996513] tveeprom 0-0000: TV standards NTSC(M) ATSC/DVB Digital 
(eeprom 0x88)
[   40.996515] tveeprom 0-0000: audio processor is SAA7164 (idx 43)
[   40.996517] tveeprom 0-0000: decoder processor is SAA7164 (idx 40)
[   40.996518] tveeprom 0-0000: has radio, has IR receiver, has no IR 
transmitter
[   40.996520] saa7164[0]: Hauppauge eeprom: model=88061
[   41.327669] tda18271 1-0060: creating new instance
[   41.332041] TDA18271HD/C2 detected @ 1-0060
[   41.585266] DVB: registering new adapter (saa7164)
[   41.585270] DVB: registering adapter 0 frontend 0 (Samsung S5H1411 
QAM/8VSB Frontend)...
[   41.870813] tda18271 2-0060: creating new instance
[   41.875142] TDA18271HD/C2 detected @ 2-0060
[   42.124717] tda18271: performing RF tracking filter calibration
[   44.473707] tda18271: RF tracking filter calibration complete
[   44.474313] DVB: registering new adapter (saa7164)
[   44.474315] DVB: registering adapter 1 frontend 0 (Samsung S5H1411 
QAM/8VSB Frontend)...
[   44.474561] saa7164[0]: registered device video0 [mpeg]
[   44.704336] saa7164[0]: registered device video1 [mpeg]
[   44.915412] saa7164[0]: registered device vbi0 [vbi]
[   44.915436] saa7164[0]: registered device vbi1 [vbi]