[mythtv-users] KWorld DVB-S 100 and Diseqc motor
Nicolas WILL
nico at youplala.net
Thu Mar 17 09:36:40 UTC 2011
On Thu, 2011-03-17 at 10:32 +0100, Terjesen Jens Peder wrote:
> Nicolas WILL wrote:
>
> ________________________________________
>
> Hello,
>
> I have 0.24-fixes running nice with a few DVB-T tuners and a single
> DVB-S (KWorld DVB-S 100) tuner on 19.2E.
>
> I would like to get the BBC HD channels on 28.2E.
>
> I am in Scotland, so adding offset LNB and a Diseqc switch on an 85cm
> dish is probably not the best solution.
>
> I have cabling constraints too, so I cannot add a second tuner.
>
> I am planning on buying and installing a dish motor, driven by Diseqc
> 1.3 / USALS.
>
> My googling reported good things about MythTV and Diseqc/USALS driving
> of the motor, but not much about the DVB-S 100 card.
>
> Is there something I missed? Any comments/hints/tips before I go buy and
> install that motor?
>
> Thanks!
>
> Nico
>
> _______________________________________________
>
> According to this footprint map you only need a 50 cm dish to receive Astra 2D even in Scotland:
> http://www.ses-astra.com/business/en/support/media-library/Footprint-Graphics/Footprint-Graphics-28-2-East/astra-2D-north.php
>
> Not sure which channels you receive from 19.2E but according to this footprint map the signals from Astra 2D should be stronger than from 19.2E:
> http://www.ses-astra.com/business/en/support/media-library/Footprint-Graphics/Footprint-Graphics-19-2-East/astra-1H.php
>
> Depending on your dish you can either side mount one LNB that will the give a weaker signal than the one on the arm, or you can offset mount both LNBs which will give slightly weaker signal on both LNBs but less degradation than on a side mounted one.
>
> There are also multifocal dishes available like the Wavefontier T90, claimed to cover e.g. 1W to 28.2E.
Thanks for the update.
I already have the dish, LNB,, tuner set to Astra 1 19.2E.
Considering the weather here, Ku band degrades rapidly, so I want to
avoid offsets. This leas me towards the motor.
This is why I am looking for experience/feedback.
Nico
More information about the mythtv-users
mailing list