[mythtv-users] BBC HD mux switching to DVBS2

[Gareth Glaccum]

________________________________
From: Another Sillyname <anothersname at googlemail.com>
>>
>> I'd like to gain some confidence that my DVB-S2 card is able to receive
>> the BBC HD mux before I upgrade to 0.24, possibly to find that's not the
>> problem...
> But more worryingly,
> 2011-06-08 22:19:30.812 DVBChan(10:/dev/dvb/adapter0/frontend0) Warning:
> Unsupported fec_inner parameter.
>
> This apparently points to a driver issue?
>
> Card is:
> 04:00.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI
> Video and Audio Decoder [MPEG Port] (rev 05)
>         Subsystem: Hauppauge computer works Inc. Device 6906
> Any ideas?
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>
I assume this is a Hauppauge DVB-S2 card?

If it is and hacking/scanning is not allowing it to work I would
suggest the following as the last thing to try (this is a bit drastic
though and you do it at your own risk).
.....
Please understand this will clear ALL your channels, even terrestrial
ones if you have 2 sources.

---
Thanks for the instructions, it was this type of destruction I was hoping to 
avoid if at all possible, it sometimes takes a while to get everything back to 
the way I like it.

The card data from messages is:
Jun  8 20:44:44 localhost kernel: cx88[0]: hauppauge eeprom: model=69100
Jun  8 20:44:44 localhost kernel: input: cx88 IR (Hauppauge WinTV-HVR400 as 
/devices/pci0000:00/0000:00:1e.0/0000:04:00.1/input/input7
Jun  8 20:44:44 localhost kernel: cx88[0]/1: CX88x/0: ALSA support for cx2388x 
boards
Jun  8 20:44:44 localhost kernel: cx8800 0000:04:00.0: PCI INT A -> GSI 20 
(level, low) -> IRQ 20
Jun  8 20:44:44 localhost kernel: cx88[0]/0: found at 0000:04:00.0, rev: 5, irq: 
20, latency: 32, mmio: 0xe4000000
Jun  8 20:44:44 localhost kernel: cx88[0]/0: registered device video0 [v4l2]
Jun  8 20:44:44 localhost kernel: cx88[0]/0: registered device vbi0
Jun  8 20:44:44 localhost kernel: cx88[0]/2: cx2388x 8802 Driver Manager
Jun  8 20:44:44 localhost kernel: cx88-mpeg driver manager 0000:04:00.2: PCI INT 
A -> GSI 20 (level, low) -> IRQ 20
Jun  8 20:44:44 localhost kernel: cx88[0]/2: found at 0000:04:00.2, rev: 5, irq: 
20, latency: 32, mmio: 0xe6000000
Jun  8 20:44:44 localhost kernel: cx88/2: cx2388x dvb driver version 0.0.6 
loaded
Jun  8 20:44:44 localhost kernel: cx88/2: registering cx8802 driver, type: dvb 
access: shared
Jun  8 20:44:44 localhost kernel: cx88[0]/2: subsystem: 0070:6906, board: 
Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69]


Is there any way I can try and capture some of the stream without mythtv in the 
way to see whether the card is capable of tuning and recording the data, prior 
to performing a toast? I remember from my last install, the DVB-S was more 
difficult to get working than the DVB-T, specifically the EIT refused to work 
originally.
Regards,
Gareth
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.mythtv.org/pipermail/mythtv-users/attachments/20110609/0931e932/attachment.html