[mythtv-users] Backend setup for win-hvr-950Q

[Barry Fawthrop]

Having read around  I see that the hvr-950Q is supported

However I can not get it to work?

I have a new Ubuntu 11.04 install with hvr-950Q  it is detected

[   20.474944] Linux video capture interface: v2.00
[   21.378889] tveeprom 0-0050: Hauppauge model 72001, rev B3F0, serial# 
6119446
[   21.378894] tveeprom 0-0050: MAC address is 00:0d:fe:5d:60:16
[   21.378898] tveeprom 0-0050: tuner model is Xceive XC5000 (idx 150, 
type 76)
[   21.378902] tveeprom 0-0050: TV standards NTSC(M) ATSC/DVB Digital 
(eeprom 0x88)
[   21.378905] tveeprom 0-0050: audio processor is AU8522 (idx 44)
[   21.378908] tveeprom 0-0050: decoder processor is AU8522 (idx 42)
[   21.378912] tveeprom 0-0050: has no radio, has IR receiver, has no IR 
transmitter
[   21.378915] hauppauge_eeprom: hauppauge eeprom: model=72001
[   21.466837] au8522 0-0047: creating new instance
[   21.466840] au8522_decoder creating new instance...
[   21.565429] i2c-core: driver [tuner] using legacy suspend method
[   21.565433] i2c-core: driver [tuner] using legacy resume method
[   21.565792] tuner 0-0061: chip found @ 0xc2 (au0828)
[   21.826481] xc5000 0-0061: creating new instance
[   21.831386] xc5000: Successfully identified at address 0x61
[   21.831389] xc5000: Firmware has not been loaded previously
[   21.832531] au8522 0-0047: attaching existing instance
[   21.839732] xc5000 0-0061: attaching existing instance
[   21.844510] xc5000: Successfully identified at address 0x61
[   21.844513] xc5000: Firmware has not been loaded previously
[   21.844517] DVB: registering new adapter (au0828)
[   21.844521] DVB: registering adapter 0 frontend 0 (Auvitek AU8522 
QAM/8VSB Frontend)...
[   21.847070] Registered device AU0828 [Hauppauge HVR950Q]
[   21.847521] usbcore: registered new interface driver au0828
[   22.104193] usbcore: registered new interface driver snd-usb-audio
[   26.726638] xc5000: waiting for firmware upload 
(dvb-fe-xc5000-1.6.114.fw)...
[   26.825660] xc5000: firmware read 12401 bytes.
[   26.825664] xc5000: firmware uploading...
[   33.840013] xc5000: firmware upload complete...

When in the MythTV backend it come up  /dev/video0  VBI /dev/vbi0  
Default input Television
probed info   Hauppauge HVR950Q [au0828]

Current Sources  is set to us-cable  ( Use brighthouse in Central 
Florida)   Not sure what the difference is between us-cable 
us-cable-hrc  and us-cable-irc  is ???

Now when I try to scan I get nothing  Yet I know the hvr is working.  If 
I connect it to my macbook then using EyeTV it works fine.

Please can someone  help me set this up

much appreciated

Thanks In Advance