[mythtv-users] LIRC stopped recognizing remote with system upgrade
Jerry Rubinow
jerrymr at gmail.com
Tue Jul 12 03:46:00 UTC 2011
I recently upgraded my MythTV frontend and stupidly wiped my old
configuration without saving my lircd.conf. So I was trying to generate a
new one. Here's the hw/sw:
Lirc 0.8.7, Mythbuntu 11.04. mceusb IR receiver. ReplayTV remote (and
universal remote emulating ReplayTV remote). lirc_dev and mceusb drivers
specified in hardware.conf. If I use the mceusb lircd.conf, everything
works fine (irw displays the button presses of my MCE remote, mythtv
responds), so I believe the receiver and software are working correctly.
However, if I use irrecord with either the ReplayTV remote or the emulated
ReplayTV remote, I end up with a file that does not recognize proper button
presses. During irrecord, I get lots of length 1 sequences. I should note
that in the old configuration (lirc under mythbuntu 10.04), the exact same
hardware worked perfectly, so I'm not sure what I could be doing wrong or
what might have changed.
If I use the Replay lircd.conf file from the LIRC site, it doesn't display
any button presses in irw.
Here's a configuration file where I just mapped a few buttons:
# Please make this file available to others
# by sending it to <lirc at ...>
#
# this config file was automatically generated
# using lirc-0.8.7(default) on Sun Jul 10 23:59:43 2011
#
# contributed by
#
# brand: test.conf
# model no. of remote control:
# devices being controlled by this remote:
#
begin remote
name test.conf
flags RAW_CODES
eps 30
aeps 100
gap 5323
begin raw_codes
name key_1
3500 3683 500 350 500 3223
450 400 500 350 500 400
450 400 500 400 450 400
450 400 450 450 450 400
450 400 450 450 450 1251
450 450 450 400 450 400
450 450 450 400 450 450
450 400 450 400 450 450
450 400 450 400 450 450
450 3240 450 450 400 1301
450 450 400 450 450 1251
450 450 450 400 450 400
450 450 450 3289 400 450
450 400 450 450 400 450
450 400 450 3335 400 450
450 450 400 450 400 450
450
name key_2
3500 3677 500 400 450 3230
500 400 450 400 500 350
500 400 450 400 450 400
500 400 450 400 450 450
450 400 450 400 450 1301
450 400 450 450 450 400
450 400 450 450 450 400
450 400 450 450 450 400
450 400 450 450 450 400
450 1301 400 450 450 2330
400 450 450 450 400
name key_3
3500
name key_4
3550 2631 500 400 450 1251
500 400 450 400 500 350
500 400 450 400 450 400
500 400 450 400 450 400
500 400 450 400 450 2286
450 400 450 450 450 400
450 400 450 450 450 400
450 400 450 450 450 400
450 400 450 450 450 400
450 3295 400 450 450 1301
400 450 450 450 400 3314
450 3269 400 3294 450 450
400 450 400 1351 400 450
400 450 400 500 400 3295
450 2306 400 1301 450 450
400 450 450 400 450 450
400
name key_5
3550 2634 500 400 450 2247
500 400 450 400 500 350
500 400 450 400 450 450
450 400 450 400 450 450
450 400 450 400 450 3288
450 400 450 450 450 400
450 400 450 450 450 400
450 400 450 450 450 400
450 450 450 400 450 400
450 2287 450 400 450 3294
400 450 400 500 400 2290
450 450 400 450 450 3232
450 450 400 3282 450 450
450 400 450 400 450 450
400 450 450 450 400 450
400 450 450 450 400 450
400
name key_6
3550 2688 450 400 450 3238
500 400 450 400 500 400
400 450 450 450 450 400
450 400 450 400 450 450
450 400 450 400 450 1301
450 400 450 450 450 400
450 400 450 450 400 450
450 450 400 450 450 400
450 400 450 450 450 400
450 3264 450 400 450 3296
450 400 450 450 400 2293
450 3291 400 450 450 3312
450 400 450 1301 400 450
400 500 400 450 400 1301
450 450 400 450 450 450
400 450 400 450 400 450
450
end raw_codes
end remote
Thanks for any help.
-Jerry
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.mythtv.org/pipermail/mythtv-users/attachments/20110711/3237fe8b/attachment.html
More information about the mythtv-users
mailing list