[mythtv-users] Possible to use a Hauppauge WinTV-HVR 950Q with MythTV?

[Adam Jimerson]

On Tue, Sep 7, 2010 at 5:31 PM, Devin Heitmueller <
dheitmueller at kernellabs.com> wrote:

> On Tue, Sep 7, 2010 at 5:17 PM, Adam Jimerson <vendion at gmail.com> wrote:
>
>>
>> Judging from the colsole output I'm running "branches/release-0-23-fixes"
>> according to pacman it is mythtv 25574-1, but the color issue was just that
>> the Hue was down to 0% and that was an easy fix (mythtv does remember
>> settings like that right?).  As for sound I have the sampling rate at 48KHz
>> but how would I set the ALSA device to my soundcard which is hw:0,0
>> according to "arecord -l"
>>
>> Bear in mind we're talking about the ALSA *capture* device built into the
> HVR-950q, not the sound card that you output to.  You can run "arecord -l"
> to determine which capture device is the 950q (it's commonly hw:1,0 if you
> only have a single sound card installed and the 950q).  From there you need
> to set the appropriate capture ALSA device within mythtv-setup.
>
> If you cannot output audio at all, that is outside the scope of the 950q
> support and somebody else could better answer your question.
>
>
> --
> Devin J. Heitmueller - Kernel Labs
> http://www.kernellabs.com
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
Ok so what is the format that mythtv-setup expects does it want it in the
"hw:1,0" form or following one of the options in the drop down
"ALSA:Default", if it helps here is the output from arecord -l

vendion ~ $ arecord -l

**** List of CAPTURE Hardware Devices ****

card 0: SB [HDA ATI SB], device 0: ALC1200 Analog [ALC1200 Analog]

  Subdevices: 1/1

  Subdevice #0: subdevice #0

card 0: SB [HDA ATI SB], device 1: ALC1200 Digital [ALC1200 Digital]

  Subdevices: 1/1

  Subdevice #0: subdevice #0

card 0: SB [HDA ATI SB], device 2: ALC1200 Analog [ALC1200 Analog]

  Subdevices: 1/1

  Subdevice #0: subdevice #0

card 2: HVR950Q [HVR-950Q], device 0: USB Audio [USB Audio]

  Subdevices: 1/1

  Subdevice #0: subdevice #0
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mythtv.org/pipermail/mythtv-users/attachments/20100907/7acb1e43/attachment.htm>