[mythtv-users] Pre-amp for Hauppauge 1600

Brian Long briandlong at gmail.com
Tue May 18 11:18:17 UTC 2010

On Sun, May 16, 2010 at 1:06 AM, Dave Day <david.scott.day at gmail.com> wrote:

> I ended up building a single bay Gray-Hoverman (one hour at Home Depot and
> 3 hours at the work bench).  The particular version I built is considered
> a UHF only antenna, so my plan was to first fix my main problem which was
> the UHF stations, and then I thought I would build a yagi for the two vhf
> ones.
> Of course when I finished it I was anxious to get a hint of whether it
> would help.  So I went to the attic and just set the SBGH down on the attic
> floor under the rotor/antenna and moved the RG-6 coax to the balun on the
> Gray-Hoverman.  I pointed the SBGH in the general direction of my stations
> and went to check the reception.  It was great!  Apparently all the stations
> are pretty comfortably above the threshold where lock occurs because the
> pictures on all 7 stations are basically perfect.  And, ironically, the two
> VHF stations are as good or better than they were before, even though the
> SBGH model I built is supposed to only be a UHF antenna.

Specifically which SBGH plans did you use?  I found the DigitalHome forum
and wondered which plan you used.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mythtv.org/pipermail/mythtv-users/attachments/20100518/415e3531/attachment.htm>

More information about the mythtv-users mailing list