[mythtv-users] Comcast DTA direct channel change?

[Scott]

On 03/25/2010 06:38 PM, Greg Oliver wrote:
> On Thu, Mar 25, 2010 at 5:36 PM, Scott <pickle136 at sbcglobal.net> wrote:
>   
>> On 03/25/2010 05:06 PM, Ron Garrison wrote:
>>     
>>> After much reading of other people's posts I'm fairly confident that
>>> the above cable should work with either the Iguana IR or the GP-IR02BK
>>> mentioned by Kirk in another post.  So I went with the following:
>>>
>>> 2 cables from
>>> http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=320446555397
>>>
>>> 1 IR transmitter box (actually remote with ir receiver that supports 2 emitters)
>>> http://www.newegg.com/Product/Product.aspx?Item=N82E16880121002
>>>       
>>     
>>> I believe the codes that Kirk put together should also work based on
>>> what I've read elswhere.  I will let you know how it all works out
>>> once I receive the items and get a chance to integrate them.
>>>
>>> Ron
>>> _______________________________________________
>>> mythtv-users mailing list
>>> mythtv-users at mythtv.org
>>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>>
>>>
>>>       
>> As i expected my mce remote has arrived.
>> Hooked up and instantly detected by lirc_mceusb Cool!
>>
>> dmesg | grep lirc
>> [   32.241651] lirc_dev: IR Remote Control driver registered, major 61
>> [   32.481062] lirc_i2c: chip 0x10020 found @ 0x71 (Hauppauge PVR150)
>> [   32.481073] lirc_dev: lirc_register_driver: sample_rate: 10
>> [244898.140653] lirc_mceusb: Windows Media Center Edition USB IR
>> Transceiver driver for LIRC 1.90
>> [244898.140674] lirc_mceusb: Daniel Melander <lirc at rajidae.se>, Martin
>> Blatter <martin_a_blatter at yahoo.com>, Dan Conti <dconti at acm.wwu.edu>
>> [244898.406899] lirc_dev: lirc_register_driver: sample_rate: 0
>> [244898.411884] lirc_mceusb[2]: Topseed Technology Corp. eHome Infrared
>> Transceiver on usb2:2
>>
>>
>> Ran this /usr/sbin/lircd --driver=default --device=/dev/lirc1
>> --output=/dev/lircd1 --pidfile=/var/run/lircd1.pid
>>
>> ls -l /dev/ | grep lirc
>> crw-rw-rw-  1 mythtv root     61,   0 2010-03-22 22:00 lirc0
>> crw-rw-rw-  1 mythtv root     61,   1 2010-03-25 18:01 lirc1
>> lrwxrwxrwx  1 root   root          19 2010-03-22 22:00 lircd ->
>> /var/run/lirc/lircd
>> srw-rw-rw-  1 root   root           0 2010-03-25 18:16 lircd1
>>
>> Sent this and no errors reported
>> irsend --device=/dev/lircd1 SET_TRANSMITTERS 1
>> irsend --device=/dev/lircd1 SEND_ONCE MotorolaDTA100-PaceDC50X KEY_9
>>
>> although i havnt seen the ir cable flash, its has the red casing, should
>> i be seeing it flicker/flash? Also tried the camera trick, but didnt see
>> anything.
>>
>>     
> You probably have the 0x008 version..  You'll need to compile lirc
> from cvs for blasting to work..
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>   
Yeah i thought about that you said that before you replied.
Do you happen to remember the configure options you used?