[mythtv-users] Fedora 12 and pvr-150

[Jarod Wilson]

On Mon, Mar 22, 2010 at 7:34 PM, Mike <roob85 at gmail.com> wrote:
> Interesting....if i remove all the other lirc_* modules then modprobe
> lirc_i2c...i can see the buttons appear in irw. So that is good. Now
> what about the blaster? I have the haup-ir-blaster.bin file that i put
> in /lib/firmware...i then unloaded the lirc modules and then reloaded
> lirc_i2c....which outputted the same info as before...and i dont see
> anything related to the blaster. Here is the out from dmesg:
>
> lirc_dev: IR Remote Control driver registered, major 249
> lirc_i2c: chip 0x0 found @ 0x71 (Hauppauge HVR1300)
> i2c ir driver 2-0071: lirc_dev: driver lirc_i2c registered at minor = 0

* Tue Mar 16 2010 Jarod Wilson <jarod at redhat.com> 2.6.32.10-78
- Fix null ptr deref in lirc_imon (#545599)
- Fix lirc_zilog not loading on cx2341x devices

The PVR-150 is a cx2341x device. Please try
http://kojipkgs.fedoraproject.org/packages/kernel/2.6.32.10/88.fc12/
or later.

--jarod


> On Mon, 2010-03-22 at 19:27 -0400, Scott wrote:
>> On 3/22/2010 7:14 PM, Mike wrote:
>> > Iam having alot of issue trying to get my pvr-150 to work under fedora
>> > 12 64bit. Ive got f12 installed and fully updated. I installed "lirc
>> > lirc-remotes lirc-libs lirc-devel lirc-doc" then
>> > copied /usr/share/lirc-remotes/hauppauge/lircd.conf.hauppauge over
>> > to /etc/lirc/lircd.conf and when i start lircd nothing works...if i run
>> > irw...nothing shows up when i press keys. I know from using ubuntu that
>> > my pvr-150 used to use the lirc_pvr150 module...but it seems that
>> > recently this module has been replaced by lirc_zilog. So if i try to
>> > modprobe lirc_zilog i see this in dmesg:
>> >
>> > lirc_dev: IR Remote Control driver registered, major 249
>> > lirc_zilog: Zilog/Hauppauge IR driver initializing
>> > lirc_zilog: ir_probe: adapter id=0x0, client addr=0x71
>> > lirc_zilog: no device found
>> > lirc_zilog: initialization complete
>> >
>> >
>> > But the remote is still not working. I have no idea where to go from
>> > here.
>> >
>> >
>> i know my pvr150 uses lirc_i2c



-- 
Jarod Wilson
jarod at wilsonet.com