[mythtv-users] LIRC config for a Hauppauge 350

Harry Devine lifter89 at comcast.net
Sun Dec 26 20:31:31 UTC 2010


My LIRC has been working for a while, but after my upgrade to 0.24, it 
no longer does.  I have my LIRC configured as an Hauppauge 350 remote.  
I see the following in dmesg:

hdevine at hdevine-desktop:/etc/lirc$ dmesg |grep lirc
[   51.383125] lirc_dev: IR Remote Control driver registered, major 61
[   51.428885] lirc_serial: port 03f8 already in use
[   51.428888] lirc_serial: use 'setserial /dev/ttySX uart none'
[   51.428890] lirc_serial: or compile the serial port driver as module and
[   51.428891] lirc_serial: make sure this module is loaded first
[712154.214756] lirc_serial: port 03f8 already in use
[712154.214764] lirc_serial: use 'setserial /dev/ttySX uart none'
[712154.214768] lirc_serial: or compile the serial port driver as module and
[712154.214772] lirc_serial: make sure this module is loaded first
[926311.764260] lirc_dev: IR Remote Control driver registered, major 61

My hardware.conf and lircd.conf appear to be the same as when it worked 
(meaning it doesn't appear to be modified), and the service is running, 
but when I run irw and press keys, I get nothing.  My kernel is:

hdevine at hdevine-desktop:/etc/lirc$ uname -a
Linux hdevine-desktop 2.6.32-24-generic #43-Ubuntu SMP Thu Sep 16 
14:58:24 UTC 2010 x86_64 GNU/Linux


Any ideas on what I can do to correct it?
Harry



More information about the mythtv-users mailing list