[mythtv-users] MCE lirc on Debian Squeeze

[Josu Lazkano]

Hello again. I add this to my /home:
http://www.mythtv.org/wiki/MCE_Remote#Example_lircrc_config_file

And there is not any repeat key. It works great.

Thanks for all your help.

Best regards.

2010/12/6 Josu Lazkano <josu.lazkano at gmail.com>:
> Thanks for your help!!! It works!
>
> I just select mceusb and mceusb2 and it works great. I found a
> lircd.conf file on internet.
>
> When I try with "irw" I get repeated keys:
>
> # irw
> 000000037ff07bfd 00 Two mceusb
> 000000037ff07bfd 00 Two mceusb
> 000000037ff07bfd 01 Two mceusb
> 000000037ff07bfd 01 Two mceusb
> 000000037ff07bfc 00 Three mceusb
> 000000037ff07bf7 00 Eight mceusb
> 000000037ff07bf7 01 Eight mceusb
>
> I need to push rapidly to get one key.
>
> This is my config:
>
> begin remote
>
>  name        mceusb
>  bits                 16
>  flags  RC6|CONST_LENGTH
>  eps                  30
>  aeps                100
>
>  header       2667   889
>  one           444   444
>  zero          444   444
>  pre_data_bits        21
>  pre_data        0x37FF0
>  gap              105000
>  toggle_bit           22
>  rc6_mask    0x100000000
>
> How can I fix the repeat problem?
>
> Thanks for all help.
>
> Kind regards.
>
> 2010/12/6 Kevin Ross <kevin at familyross.net>:
>> On 12/06/2010 11:51 AM, Josu Lazkano wrote:
>>>
>>> Hello, I am trying to configure my remote on lirc. On Lenny I got it
>>> working, but on Squueze I am getting troubles. The receiver is a MCE
>>> one.
>>>
>>> When I run this, the re is no any mceusb2 driver:
>>>
>>> lircd --driver=help
>>> Driver `help' not supported.
>>> Supported drivers:
>>>        accent
>>>        alsa_usb
>>>        ...
>>>
>>> My remote is this one:
>>> http://www.mythtv.org/wiki/File:MCE-Remote-2-alt2.jpg
>>>
>>> Anyone has this remote working on MythTV?
>>>
>>> On the future, the idea is to control all devices (TV, amplifier...)
>>> with the receiver/transmiter.
>>>
>>> Thanks for all your help and best regards.
>>
>> Install lirc-modules-source.  During install, it should ask you what modules
>> you'd like to build.  Select mceusb2.  If you already have it installed, you
>> can run "dpkg-reconfigure lirc-modules-source".
>>
>> After that, to build the module, run as root:
>> # m-a prepare
>> # m-a a-i lirc
>>
>> This will build and install the lirc_mceusb2 kernel module.  Make sure your
>> /etc/lirc/hardware.conf file looks something like:
>>
>> #Try to load appropriate kernel modules
>> LOAD_MODULES=true
>>
>> # Run "lircd --driver=help" for a list of supported drivers.
>> DRIVER=""
>> # If DEVICE is set to /dev/lirc and udev is in use /dev/lirc0 will be
>> # automatically used instead
>> DEVICE="/dev/lirc0"
>> MODULES="lirc_mceusb2"
>>
>> Restart lirc (/etc/init.d/lirc restart) and it should load the module for
>> you, and it should now work.
>>
>> -- Kevin
>>
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users at mythtv.org
>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>
>
>
>
> --
> Josu Lazkano
>



-- 
Josu Lazkano