[mythtv-users] myth 0.24 cannot get sound on one channel
Seth Daniel
mythtv.org at sethdaniel.org
Sun Dec 5 21:21:16 UTC 2010
Hi,
I am unable to get sound to playback for one channel. All other
channels work fine. The channel is KCOP (channel 13) here in Los
Angeles. I don't know if this channel worked with any version previous
to myth 0.24 since, until very recently, I was unable to tune this
channel (OTA).
I have one other weird sound problem with channel 11 (KTTV). Initially
I don't get sound, but if I skip forward several minutes I get sound. I
can then skip back to the beginning and sound playback is fine. Perhaps
an interesting tidbit is that KTTV and KCOP are related. I think FOX
owns both of them.
I have attached a log when I attempt to play something from KCOP. I
used -v audio. I don't see anything interesting, but I don't know what
to look for either. In the log I am using LiveTV, but recorded shows
don't work either. Also in the log I am using the ALSA:default output
device which I manully entered in the sound setup screen. Since then I
have changed to using ALSA:iec958:CARD=CMI9738,DEV=0 as the output
device (this is a device found during the audio device scan) and the
same problem persists. My other sound settings:
speaker config: 5.1
AC3 / DTS passthrough checked
upmix quality: 0
Thank you.
--
seth /\ sethdaniel.org
-------------- next part --------------
2010-12-05 12:48:30.768 Using protocol version 63
2010-12-05 12:48:30.794 Spawning LiveTV Recorder -- begin
2010-12-05 12:48:30.859 Spawning LiveTV Recorder -- end
2010-12-05 12:48:30.869 We have a playbackURL(myth://127.0.0.1:6543/1131_20101205124830.mpg) & cardtype(DUMMY)
2010-12-05 12:48:30.869 We have a RingBuffer
2010-12-05 12:48:30.983 Pulse: PulseAudio not running
2010-12-05 12:48:30.991 AO: Sample rate 48000 is supported
2010-12-05 12:48:30.991 AO: 2 channel(s) are supported
2010-12-05 12:48:31.001 AO: AC3 or DTS capable
2010-12-05 12:48:31.001 AO: 6 channel(s) are supported
2010-12-05 12:48:31.003 AO: Killing AudioOutputDSP
2010-12-05 12:48:31.026 Clearing OpenGL painter cache.
2010-12-05 12:48:31.243 VDPAU: Created 2 output surfaces.
2010-12-05 12:48:31.243 VDPAU: Version 1
2010-12-05 12:48:31.256 VDPAU: Information NVIDIA VDPAU Driver Shared Library 195.36.24 Thu Apr 22 10:39:56 PDT 2010
2010-12-05 12:48:31.256 VDPAU: Created VDPAU render device 1920x1080
2010-12-05 12:48:31.291 OSD: Base theme size: 1280x720
2010-12-05 12:48:31.291 OSD: Scaling factors: 1.5x1.5
2010-12-05 12:48:31.333 OSD: Base theme size: 1280x720
2010-12-05 12:48:31.333 OSD: Scaling factors: 1.5x1.5
2010-12-05 12:48:31.337 Player(0): Video timing method: USleep with busy wait
2010-12-05 12:48:31.337 TV: Changing from None to WatchingLiveTV
2010-12-05 12:48:31.337 TV: State is LiveTV & mctx == ctx
2010-12-05 12:48:31.344 TV: UpdateOSDInput done
2010-12-05 12:48:31.344 TV: UpdateLCD done
2010-12-05 12:48:31.344 TV: ITVRestart done
2010-12-05 12:48:31.427 VDPAU: Added 2 output surfaces (total 4, max 4)
2010-12-05 12:48:33.290 Player(0): DecoderGetFrame() called with NULL decoder.
2010-12-05 12:48:33.644 VDPAU Painter: Clearing VDPAU painter cache.
2010-12-05 12:48:33.647 MythPainter: 4 images not yet de-allocated.
2010-12-05 12:48:33.674 Clearing OpenGL painter cache.
2010-12-05 12:48:33.809 VDPAU: Created 2 output surfaces.
2010-12-05 12:48:33.809 VDPAU: Created VDPAU render device 1920x1080
2010-12-05 12:48:33.886 Player(0): Forcing decode extra audio option on (Video method requires it).
2010-12-05 12:48:33.887 AFD: Opened codec 0xacacc230, id(MPEG2VIDEO) type(Video)
2010-12-05 12:48:33.888 AFD: codec AC3 has 2 channels
2010-12-05 12:48:33.888 AFD: Opened codec 0xa72c2840, id(AC3) type(Audio)
2010-12-05 12:48:33.888 AFD: Audio Track #1 is A/V stream #1 and has 2 channels in the English language(6647399).
2010-12-05 12:48:33.888 AFD: codec AC3 has 2 channels
2010-12-05 12:48:33.889 AFD: Opened codec 0xacacd190, id(AC3) type(Audio)
2010-12-05 12:48:33.889 AFD: Audio Track #2 is A/V stream #2 and has 2 channels in the Spanish; Castilian language(7565409).
2010-12-05 12:48:33.985 AFD: Trying to select audio track (w/lang)
2010-12-05 12:48:33.986 AFD: Selected track 1: English AC3 2ch (A/V Stream #1)
2010-12-05 12:48:34.000 AFD: Initializing audio parms from audio track #1
2010-12-05 12:48:34.000 AFD: Audio format changed
from id(NONE) -1Hz -1ch -1bps to id( AC3) 48000Hz 2ch 16bps
2010-12-05 12:48:34.000 AO: Killing AudioOutputDSP
2010-12-05 12:48:34.118 Pulse: PulseAudio not running
2010-12-05 12:48:34.124 AO: Sample rate 48000 is supported
2010-12-05 12:48:34.124 AO: 2 channel(s) are supported
2010-12-05 12:48:34.134 AO: AC3 or DTS capable
2010-12-05 12:48:34.134 AO: 6 channel(s) are supported
2010-12-05 12:48:34.134 AO: Killing AudioOutputDSP
2010-12-05 12:48:34.134 AO: Original codec was AC3, signed 16 bit, 48 kHz, 2 channels
2010-12-05 12:48:34.134 AO: enc(0), passthru(0), canAC3(1), canDTS(1), canLPCM(0), configured_channels(2), 2 channels supported(1)
2010-12-05 12:48:34.134 AO: Opening audio device 'default' ch 2(2) sr 48000 sf signed 16 bit reenc 1
2010-12-05 12:48:34.135 ALSA: SetParameters(format=2, channels=2, rate=48000, buffer_time=200000, period_time=50000)
2010-12-05 12:48:34.135 ALSA: Buffer time = 200000 us
2010-12-05 12:48:34.136 ALSA: Period time = 50000 us
2010-12-05 12:48:34.136 ALSA: Buffer size = 9600 | Period size = 2400
2010-12-05 12:48:34.136 AO: Audio fragment size: 4800
2010-12-05 12:48:34.136 AO: Audio Stretch Factor: 1
2010-12-05 12:48:34.136 AO: Ending Reconfigure()
2010-12-05 12:48:34.136 AudioPlayer: Enabling Audio
2010-12-05 12:48:34.136 AO: Reconfigure(): No change -> exiting
2010-12-05 12:48:34.136 AO: kickoffOutputAudioLoop: pid = 10223
2010-12-05 12:48:34.136 AO: OutputAudioLoop: Play Event
2010-12-05 12:48:34.174 AO: Pause 0
2010-12-05 12:48:34.174 AO: Pause 1
2010-12-05 12:48:34.177 AO: OutputAudioLoop: audio paused
2010-12-05 12:48:34.205 AO: Pause 0
2010-12-05 12:48:34.208 VDPAU: Added 2 output surfaces (total 4, max 4)
2010-12-05 12:48:34.227 AO: OutputAudioLoop: Play Event
2010-12-05 12:48:34.246 AO: Pause 1
2010-12-05 12:48:34.277 AO: OutputAudioLoop: audio paused
2010-12-05 12:48:34.354 Player(0): Waited 100ms for video buffers AAAAAAAAAAAAAAaaL
2010-12-05 12:48:34.356 Player(0): Waited 100ms for video buffers AAAAAAAAAAAAAAaaL
2010-12-05 12:48:34.490 Player(0): Waited 100ms for video buffers AAAAAAAAAAAAAAaaL
2010-12-05 12:48:34.621 Player(0): Waited 100ms for video buffers AAAAAAAAAAAAAAaaL
2010-12-05 12:48:34.626 Player(0): Waited 100ms for video buffers AAAAAAAAAAAAAAaaL
2010-12-05 12:48:34.730 Player(0): Waited 100ms for video buffers AAAAAAAAAAAAAAaaL
2010-12-05 12:48:34.733 Player(0): Waited 100ms for video buffers AAAAAAAAAAAAAAaaL
2010-12-05 12:48:34.755 Player(0): Waited 100ms for video buffers AAAAAAAAAAAAAAaaL
2010-12-05 12:48:34.867 Player(0): Waited 100ms for video buffers AAAAAAAAAAAAAAaaL
2010-12-05 12:48:34.996 Player(0): Waited 100ms for video buffers AAAAAAAAAAAAAAaaL
2010-12-05 12:48:35.130 Player(0): Waited 100ms for video buffers AAAAAAAAAAAAAAaaL
2010-12-05 12:48:35.132 Player(0): Waited 100ms for video buffers AAAAAAAAAAAAAAaaL
2010-12-05 12:48:35.181 AO: Pause 0
2010-12-05 12:48:35.227 AO: OutputAudioLoop: Play Event
More information about the mythtv-users
mailing list