[mythtv-users] Nova T-500 on Lucid stopped working

[Nicolas Will]

On Fri, 2010-08-06 at 22:00 +1000, me wrote:
> This card doesn't seem to appear in lsusb or lspci after updating from
> 2.6.32-23 to 2.6.32-24 - although there were other problems in the
> update so maybe something went horribly wrong in the process. Can
> someone verify what should be appearing with lsusb and lspci? I have
> never had a hardware failure before and it seems unlikely that a dual
> tuner would be completely dead. dmesg|grep -i dvb only shows the
> following:
> 
> 
> [  792.049374] usbcore: registered new interface driver
> dvb_usb_dib0700
> 
> 
> Any ideas.... I missed the game and I don't want the lame off the
> shelf set top box...

I have been running 2.6.32-24-generic #38-Ubuntu SMP Mon Jul 5 09:20:59
UTC 2010 x86_64 GNU/Linux for 13 days.

Nico


lspci:

07:01.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62)
07:01.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62)
07:01.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 65)

lsusb

Bus 003 Device 002: ID 2040:9950 Hauppauge 

dmesg

[    6.817051] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in cold state, will try to load a firmware
[    6.817055] usb 3-1: firmware: requesting dvb-usb-dib0700-1.20.fw
[    7.230644] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[    7.960015] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
[    7.960075] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    7.960320] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
[    8.085857] DVB: registering adapter 0 frontend 0 (DiBcom 3000MC/P)...
[    9.126651] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[    9.126865] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
[    9.132400] DVB: registering adapter 1 frontend 0 (DiBcom 3000MC/P)...
[    9.738767] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1e.0/0000:07:01.2/usb3/3-1/input/input14
[    9.738829] dvb-usb: schedule remote query interval to 50 msecs.
[    9.738834] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected.