[mythtv-users] HDHomerun Channel Updating issues

[Rob Dege]

Hello,

A few weeks ago, my HDHomerun stopped receiving QAM channels.  A quick
investigation revealed that Time Warner had changed the channels around.
Using the HDHomerun Windows program, I was able to relocate all of the
relevant channel info.  I then updated the channel & dtv_multiplex tables to
reflect the new information and ......  nothing.  The problem was not
resolved.  Can someone look over my steps and see if I did something wrong?
Or am I trying to solve this problem the wrong way?

Here's WUTV (aka Fox):

SCANNING: 687000000 (us-irc:106, us-cable:106)
LOCK: qam256 (ss=97 snq=94 seq=100)
TSID: 0x2397
PROGRAM 1: 0
PROGRAM 2: 0
PROGRAM 3: 0
PROGRAM 4: 0


I updated the frequency to 687000000 in the dtv_multiplex table where
dtv_multiplex.mplexid=channel.mplexid.  I then updated freqid to 106 (from
us-cable), and serviceid to 1 (from PROGRAM 1) where channum="The old Fox HD
Channel Number"  When I try to tune that channel in through LiveTV, it shows
a strength of 97%, but sits there at (La__) Partial Lock until it times out.

Relevant info:
mythtv-0.20.2
hdhomerun firmware - 20090830


-- 
-Rob

Hell hath no fury like a snowplow driver from Cheektowaga who gave
up cable and Canadian beer so he could afford Bills season tickets.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mythtv.org/pipermail/mythtv-users/attachments/20091003/b70e7ddd/attachment.htm>