[mythtv-users] Multiple lineups with hdhomerun
fayoeu at gmail.com
Tue Jun 9 18:02:35 UTC 2009
Thanks for all the suggestions. Through trial and error, i was able to get
most of the channels I wanted. Here was my sequence of actions, but there
has to be a better way. Please suggest a better method if i did something
1. Use scte65scan to do most of the work mapping the channels/callsign/etc
on one tuner/videosource. The lineup here was the "Digital Cable" lineup.
2. On the other tuner, scanned for the "HD broadcast" lineup. This gave me
most of my HD channels that came over the cable line with mostly correct
3. Now I overlaid the HD channels onto the same videosource as step #1, by
changing the videosource to match the one in step #1.
4. Now the fun parts begin, for each channel that didn't get a xmltvid
mapping after running mythfilldatabase, manually matched the xmltvid with
the number given on the schedulesdirect.org lineup.
5. Now, deleted the "HD broadcast" channel lineup, since I moved the
channels to the other videosource.
6. Changed the videosource of the 2nd tuner to match the first.
Now i have both the HD channels and the cable channels.
On Tue, May 26, 2009 at 8:59 PM, Fa <fayoeu at gmail.com> wrote:
> Hi all, I want to be able to use my hdhomerun to record both digital cable
> channels AND HD broadcast. I am using the comcast cable provider.
> Currently I have the tuner associated with the "HD broadcast (OTA)"
> videosource, losing all the non-hd digital cable channels. I know that in
> mythtv-setup I can associate it with a "digital cable" lineup and it will
> give me the digital cable lineup, but then I'll lose my HD channels. How
> can I have both lineups associated with the same tuner?? I hope that I am
> missing something very obvious and I don't need to manually alter the DB.
> I followed the instructions here to setup the hdhomerun inside of myth:
> In particular, "Create a channel lineup and enable/disable channels based
> on channels listed in the Channel Editor in mythtv-setup. Note that MythTV
> uses the ATSC channel numbering as specified in the transport stream, not
> the remapped cable channel numbering so you will need to select OTA/Antenna
> as the source in Zap2it."
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the mythtv-users