[mythtv-users] Installed Two AVerMedia AVerTVHD MCE A180
kkuphal at gmail.com
Tue Jan 27 14:59:39 UTC 2009
On Tue, Jan 27, 2009 at 8:49 AM, Adam Siegel <agsiegel at gmail.com> wrote:
> I've installed two AVerMedia AVerTVHD MCE A180 PCI cards. They are both
> recognized. When I do a modprobe
> modprobe saa7134 card=75
> The first card shows
> [24779.475969] saa7130: found at 0000:00:08.0, rev: 1, irq: 16, latency:
> 32, mmio: 0xec000000
> [24779.475982] saa7130: subsystem: 1461:1044, board: AVerMedia AVerTVHD
> MCE A180 [card=75,insmod option]
> [24779.476030] saa7130: board init: gpio is 10400
> However the second card shows
> [24779.667103] saa7130: found at 0000:00:0a.0, rev: 1, irq: 18, latency:
> 32, mmio: 0xec001000
> [24779.667111] saa7130: subsystem: 1461:1044, board: UNKNOWN/GENERIC
> [24779.667125] saa7130: board init: gpio is 10400
> I am not sure why the second card is not getting the "card=75" option on
> the modprobe.
> The first card gets a /dev/video0 and a /dev/dvb/adapter0
> The second card only gets a /dev/video1
> The first card shows the firmware loading
> [24779.860274] nxt200x: NXT2004 Detected
> [24779.860382] DVB: registering new adapter (saa7130)
> [24779.860388] DVB: registering frontend 0 (Nextwave NXT200X VSB/QAM
> The second card is not registered as a DVB adapter. Probably because it is
> not getting the card=75 option.
> The first card is working great. Picture and sound are perfect.
> Any ideas?
Sorry I don't have a great suggestion. I'm using two A180's in my system
but I don't use any "card=X" option when loading. I thought I remembered
something from other drivers of a syntax for the second card like
"card=75,75"? You might try googling around for other dual card scenarios
(ivtv, etc) to see if there is a standard syntax for setting the second card
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the mythtv-users