[mythtv-users] Hauppauge 1600 will pick up channels in scan but wont show analog video

[Nick F]

On Thu, Jan 22, 2009 at 8:57 AM, Russ Chambliss, Jr. <
accidentalgamer at gmail.com> wrote:

> I have recently run into a problem that i am at a loss with, and i was
> hoping someone out there might be able to help.  Im currently running a
> knoppmyth 5.5 and using a Hauppauge 1600 card.  I was able to get the system
> set up and running with analog cable on the analog tuner, and digital over
> the air broadcasts on the digital tuner.   I found that my cable company
> brodcasts anumber of digital chanels unencrypted and so I tried to set up
> the digital tuner to pull in unscrambled channels.  I unplugged the cable
> line to the analog side and plugged it in to the digital tuner.  After
> fooling around for a while with the setup trying to scan for channels, i
> gave up on trying pull in the digital cable so i switched the cables back to
> the original configuration and restarted myth.
> ...Through out all of this my digital tuner has no problems, im able to
> watch over the air broadcasts.  The analog tuner will pick up all of the
> cable channels when i scan in mythtv-setup, but will not display anything
> when i try to watch the tuner in mythtv.  The only thing i can think to do
> at this point is reinstall knoppmyth, but im not really sure that will solve
> the problem, and i dont really want to go through all that trouble.
>
After a reboot - what does dmesg | grep cx18 show?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mythtv.org/pipermail/mythtv-users/attachments/20090122/e3798af6/attachment.htm>