[mythtv-users] DViCO FusionHDTV 5 Lite, Latest Kernel Drivers, & Video Corruption
sastie at gmail.com
Sat Jun 7 20:06:13 UTC 2008
Just to make sure, do you have a TV with a QAM tuner ?
If so I would try to connect it at the same outlet with the same cable you
used for your Fusion cartd.
If you get the same artifacts something maybe wrong with your line.
It will help to narrow the problem down to the card / kernel module if the
TV gets a perfect reception...
On Sat, Jun 7, 2008 at 2:36 PM, Matthew Redmon <mredmon at gmail.com> wrote:
> On Sat, Jun 7, 2008 at 9:35 AM, Sebastien Astie <sastie at gmail.com> wrote:
> > I had the same problem tuning QAM with my HDHR but only on a few
> > I turned out to be due to a rf amplifier at the distribution point in my
> > Once I changed the amplifier with one provided by the cable company I
> didn't have as much corruption, it was a huge improvement.
> > then I changed all my coax cables with coax cables from blue jeans cable
> http://bluejeanscable.com and my picture quality was perfect.
> > On Sat, Jun 7, 2008 at 11:38 AM, Matthew Redmon <mredmon at gmail.com>
> >> Hi! I've been trying to get my two DViCO FusionHDTV 5 Lite cards
> working with a new install of FC9. Everything seems to work just fine
> except that the video I get from the cards is corrupt (see video at:
> http://www.youtube.com/watch?v=rH1tsiPB8us). I know the cards are fine,
> as they worked on this machine previously using FC5 and they currently work
> if I boot into Windows XP.
> >> I am using the drivers included in the 22.214.171.124-18 kernel to record
> QAM-256 cable from Comcast in Seattle, WA.
> >> The cards are correctly auto-detected as card 135 with tuners 0043 &
> 0061. I scanned for channels using dvb-apps and used a script to cut down
> the ~250 channels found to just those that would tune (presumably, the
> unencrypted channels). Of those 56, they all have the corruption seen in
> the video.
> >> Any ideas? Anybody have one of these cards working with a recent
> >> Thanks!
> >> ~Matt
> Thank you for the suggestion but that doesn't seem to be the problem
> I'm having. I didn't think it was since it occurred over all the
> channels but only when in linux. To make sure, I ran a cable directly
> from one of my tuners to the cable outlet, bypassing my amp, and
> tested it. I got the same corruption (the same level of corruption,
> Any more suggestions?
> mythtv-users mailing list
> mythtv-users at mythtv.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the mythtv-users