[mythtv-users] Newbie Question about getting a Winfast 2000XP Expert working with MythTV

[Chris Keegan]

Hi All,

This is all pretty new to me and despite having been going at this for
a couple of weeks, I don't seem to be able to make any progress so any
insights would be much appreciated.

Here's the results (tail /var/logs/messages) of doing (rmmod cx8800,
rmmod cx88xx, modprobe i2c_scan=1 card=5 tuner=63,
 modprobe cx8800):

kernel: [180077.710839] cx2388x v4l2 driver version 0.0.6 loaded
kernel: [180077.711670] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21
(level, low) -> IRQ 22
kernel: [180077.711726] CORE cx88[0]: subsystem: 107d:6611, board:
Leadtek Winfast 2000XP Expert [card=5,insmod option]
kernel: [180077.711729] TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
kernel: [180077.834190] tuner 0-0043: chip found @ 0x86 (cx88[0])
kernel: [180077.834306] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
kernel: [180077.837642] tuner 0-0060: All bytes are equal. It is not a TEA5767
kernel: [180077.837646] tuner 0-0060: chip found @ 0xc0 (cx88[0])
kernel: [180077.840427] tuner 0-0060: type set to 63 (Philips
FMD1216ME MK3 Hybrid Tuner)
kernel: [180077.843097] tuner 0-0060: type set to 63 (Philips
FMD1216ME MK3 Hybrid Tuner)
kernel: [180077.937726] cx88[0]: i2c scan: found device @ 0x86
[tda9887/cx22702]
kernel: [180077.947619] cx88[0]: i2c scan: found device @ 0xa0  [eeprom]
kernel: [180077.962047] cx88[0]: i2c scan: found device @ 0xc0  [tuner (analog)]
kernel: [180078.026649] cx88[0]: Leadtek Winfast 2000XP Expert config:
tuner=38, eeprom[0]=0x01
kernel: [180078.033239] input: cx88 IR (Leadtek Winfast 2000XP as
/class/input/input8
kernel: [180078.033556] cx88[0]/0: found at 0000:02:05.0, rev: 5, irq:
22, latency: 32, mmio: 0xe2000000
kernel: [180078.080894] cx88[0]/0: registered device video0 [v4l2]
kernel: [180078.081381] cx88[0]/0: registered device vbi0
kernel: [180078.081842] cx88[0]/0: registered device radio0

and here's the result of dmesg | grep cx2388:

[180077.710839] cx2388x v4l2 driver version 0.0.6 loaded

and dmesg | grep cx8800:

[   38.458611] CORE cx88[0]: subsystem: 107d:6611, board: Leadtek
Winfast 2000XP Expert [card=5,autodetected]
[   38.614539] cx88[0]: Leadtek Winfast 2000XP Expert config:
tuner=38, eeprom[0]=0x01
[   38.614660] input: cx88 IR (Leadtek Winfast 2000XP as /class/input/input4
[   38.614706] cx88[0]/0: found at 0000:02:05.0, rev: 5, irq: 22,
latency: 32, mmio: 0xe2000000
[   38.734957] tuner 0-0043: chip found @ 0x86 (cx88[0])
[   38.751554] tuner 0-0060: chip found @ 0xc0 (cx88[0])
[   38.767240] cx88[0]/0: registered device video0 [v4l2]
[   38.767273] cx88[0]/0: registered device vbi0
[   38.767306] cx88[0]/0: registered device radio0
[180077.711726] CORE cx88[0]: subsystem: 107d:6611, board: Leadtek
Winfast 2000XP Expert [card=5,insmod option]
[180077.834190] tuner 0-0043: chip found @ 0x86 (cx88[0])
[180077.837646] tuner 0-0060: chip found @ 0xc0 (cx88[0])
[180077.937726] cx88[0]: i2c scan: found device @ 0x86  [tda9887/cx22702]
[180077.947619] cx88[0]: i2c scan: found device @ 0xa0  [eeprom]
[180077.962047] cx88[0]: i2c scan: found device @ 0xc0  [tuner (analog)]
[180078.026649] cx88[0]: Leadtek Winfast 2000XP Expert config:
tuner=38, eeprom[0]=0x01
[180078.033239] input: cx88 IR (Leadtek Winfast 2000XP as /class/input/input8
[180078.033556] cx88[0]/0: found at 0000:02:05.0, rev: 5, irq: 22,
latency: 32, mmio: 0xe2000000
[180078.080894] cx88[0]/0: registered device video0 [v4l2]
[180078.081381] cx88[0]/0: registered device vbi0
[180078.081842] cx88[0]/0: registered device radio0