[mythtv-users] Asus M2NPV-VM F8 Suspend
Mitch Gore
mitchell.gore at gmail.com
Fri Jan 18 01:58:25 UTC 2008
On Jan 17, 2008 6:56 PM, Mitch Gore <mitchell.gore at gmail.com> wrote:
>
>
> On Jan 17, 2008 10:15 AM, Mitch Gore <mitchell.gore at gmail.com> wrote:
>
> > On Jan 17, 2008 7:07 AM, Ma Begaj <derliebegott at gmail.com> wrote:
> >
> > > 2008/1/17, Mitch Gore <mitchell.gore at gmail.com>:
> > > > This is a continuation of the thread
> > > > ASUS M2NPV-VM or GIGABYTE GA-M68SM-S2
> > > > http://www.gossamer-threads.com/lists/mythtv/users/309798
> > > > I am renaming it to keep the subject in sync with the topic
> > > >
> > > > ##############################################################
> > > >
> > > > Ok, So here is where I stand now.
> > > >
> > > > The goals:
> > > >
> > > > Get suspend to work on my BE/FE box
> > > > have power via remote.
> > > > Have power via remote frontend work.
> > > >
> > > > Box is a Asus M2NPV-VM
> > > > AMD X2 5200
> > > > 1 Gig of RAM
> > > > PVR 150
> > > > 2 Sata drives
> > > > HDHomeRun
> > > > MCE USB remote /w lirc
> > > >
> > > > Where i stand now:
> > > >
> > > > To put box in suspend I must unload IVTV then reload after after
> > > resume.
> > > > 'rmmod ivtv' 'modprobe ivtv'
> > > > To get power via remote I moved jumpers on Motherboard. and 'echo
> > > USB0 >
> > > > /proc/acpi/wakeup'
> > > > To suspend I do a 'echo mem > /sys/power/state
> > > > To wake push power button or remotes power button.
> > > >
> > > > What I need to fix:
> > > > X does not reload on resume. I am running the latest nVidia 169.07drivers
> > > > using the onboard 6150 graphics.
> > > >
> > > > Beyond that the box works perfectly. Once i resume i can ssh to the
> > > box and
> > > > see mythbackend is running and I can hit it with Mythweb. Also my
> > > > recordings will work just find. I just don't get a GUI.
> > > >
> > > > So anyone out there have this issue and find a resolution?
> > > >
> > >
> > > Try using "s2ram" instead of "echo mem >/sys/power/state". s2ram has
> > > some built in support for saving gui before suspend.
> > >
> > > But on the other side ... it should work without s2ram as it works for
> > > me and paul and a few others. Maybe you are missing a module in
> > > xorg.conf. Can you post the modules section from the xorg config file.
> > >
> > > _______________________________________________
> > > mythtv-users mailing list
> > > mythtv-users at mythtv.org
> > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> > >
> >
> >
> > Sure..
> >
> > [myth at mythtv ~]$ cat /etc/X11/xorg.conf
> >
> > # nvidia-settings: X configuration file generated by nvidia-settings
> > # nvidia-settings: version 1.0 (buildmeister at builder26) Wed Jun 13
> > 16:54:50 PDT 2007
> > # Xorg configuration created by pyxf86config
> >
> > Section "ServerLayout"
> > Identifier "Default Layout"
> > Screen 0 "Screen0" 1920 0
> > Screen 1 "Screen1" LeftOf "Screen0"
> > InputDevice "Keyboard0" "CoreKeyboard"
> > EndSection
> >
> > Section "Files"
> >
> > # FontPath "unix/:7100"
> > ModulePath "/usr/lib64/xorg/modules/extensions/nvidia"
> > ModulePath "/usr/lib64/xorg/modules/extensions"
> > ModulePath "/usr/lib64/xorg/modules"
> > EndSection
> >
> > Section "Module"
> > Load "dbe"
> > Load "extmod"
> > Load "fbdevhw"
> > Load "glx"
> > Load "record"
> > Load "freetype"
> > Load "type1"
> > Load "v4l"
> > EndSection
> >
> > Section "ServerFlags"
> > Option "Xinerama" "0"
> > Option "AIGLX" "on"
> > EndSection
> >
> > Section "InputDevice"
> > Identifier "Keyboard0"
> > Driver "kbd"
> > Option "XkbModel" "pc105"
> > Option "XkbLayout" "us+inet"
> > Option "swcursor"
> > EndSection
> >
> > Section "Monitor"
> > Identifier "Monitor0"
> > VendorName "Unknown"
> > ModelName "Envision EN5400"
> > HorizSync 30.0 - 63.0
> > VertRefresh 50.0 - 76.0
> > EndSection
> >
> > Section "Monitor"
> > Identifier "Monitor1"
> > VendorName "Unknown"
> > ModelName "OPTi Optoma HD80"
> > HorizSync 15.0 - 120.0
> > VertRefresh 15.0 - 99.0
> > EndSection
> >
> > Section "Device"
> > Identifier "Videocard0"
> > Driver "nvidia"
> > VendorName "NVIDIA Corporation"
> > BoardName "Quadro NVS 210S / NVIDIA GeForce 6150LE"
> > Option "HWCursor" "off"
> > Option "AIGLX" "on"
> > Option "NoLogo" "true"
> > Option "NvAGP" "1"
> > BusID "PCI:0:5:0"
> > EndSection
> >
> > Section "Device"
> > Identifier "Videocard1"
> > Driver "nvidia"
> > VendorName "NVIDIA Corporation"
> > BoardName "Quadro NVS 210S / NVIDIA GeForce 6150LE"
> > Option "NoLogo" "true"
> > Option "AIGLX" "on"
> > BusID "PCI:0:5:0"
> > Screen 1
> > EndSection
> >
> > Section "Screen"
> > Identifier "Screen0"
> > Device "Videocard0"
> > Monitor "Monitor0"
> > DefaultDepth 24
> > Option "TwinView" "0"
> > Option "metamodes" "CRT: nvidia-auto-select +0+0"
> > SubSection "Display"
> > Depth 24
> > Modes "1600x1200" "1280x1024" "1024x768" "800x600"
> > "640x480"
> > EndSubSection
> > EndSection
> >
> > Section "Screen"
> > Identifier "Screen1"
> > Device "Videocard1"
> > Monitor "Monitor1"
> > DefaultDepth 24
> > Option "TwinView" "0"
> > Option "metamodes" "DFP: nvidia-auto-select +0+0"
> > Option "AddARGBGLXVisuals" "True"
> > EndSection
> >
> > Section "Extensions"
> > Option "Composite" "Enable"
> > EndSection
> >
> >
> > With s2ram...I cant find a package named that. There is tuxonice which
> > when I used that it was actually worse.
> > Do i need to use any quirks.. using the command pm-suspend does the same
> > bahavior as echo mem > /sys/power/state but I also see options...
> >
> > [myth at mythtv ~]$ pm-suspend --help
> > pm-action [options]
> >
> > Options can change how the supend or hibernate is done.
> >
> > Possible actions are:
> >
> > --quirk-dpms-on
> > --quirk-dpms-suspend
> > --quirk-radeon-off
> > --quirk-reset-brightness
> > --quirk-s3-bios
> > --quirk-s3-mode
> > --quirk-vbe-post
> > --quirk-vbemode-restore
> > --quirk-vbestate-restore
> > --quirk-vga-mode3
> >
> > [myth at mythtv ~]$
> >
> > Thanks,
> > Mitchell
> >
>
>
>
> I have also tried adding the s3 bios option on the grub line. I have read
> this helps for others. here is what the grub.conf file looks like.
> timeout=5
> splashimage=(hd0,0)/boot/grub/splash.xpm.gz
> hiddenmenu
> title Fedora (2.6.23.9-85.fc8)
> root (hd0,0)
> kernel /boot/vmlinuz-2.6.23.9-85.fc8 ro root=LABEL=/1 rhgb quiet
> acpi_sleep=s3_bios,s3_mode agp=off
> initrd /boot/initrd-2.6.23.9-85.fc8.img
>
>
> Mitchell
>
>
Also what BIOS are you running if S3 is working for you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20080117/a648cbb1/attachment-0001.htm
More information about the mythtv-users
mailing list