[mythtv-users] Changed tuner PCI slot - lost video

David Fishburn dfishburn.mythtv at gmail.com
Mon Jan 14 02:01:03 UTC 2008


This is my dmesg output:

root at myth:/dev# dmesg |grep ivtv
[   34.364767] ivtv:  ==================== START INIT IVTV ====================
[   34.364771] ivtv:  version 0.8.1 (tagged release) loading
[   34.364773] ivtv:  Linux version: 2.6.18.1-custom SMP mod_unload gcc-4.1
[   34.364775] ivtv:  In case of problems please include the debug info between
[   34.364776] ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
[   34.364778] ivtv:  any module options, when mailing the ivtv-users
mailinglist.
[   34.895056] ivtv0: Autodetected Hauppauge card (cx23416 based)
[   34.895612] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[   35.576408] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
[   35.846740] ivtv0: Autodetected WinTV PVR 500 (unit #1)
[   35.864424] tuner 3-0060: chip found @ 0xc0 (ivtv i2c driver #0)
[   35.864774] tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[   35.907172] cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
[   40.298590] wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #0)
[   40.407435] ivtv0 warning: Encoder mailbox not found
[   40.448765] ivtv0 warning: Decoder mailbox not found
[   40.448767] ivtv0: Error locating firmware.
[   40.452882] ivtv0: Error -12 on initialization
[   40.452889] ivtv: probe of 0000:02:08.0 failed with error -12
[   40.452914] ivtv0: Autodetected Hauppauge card (cx23416 based)
[   40.453439] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[   41.083918] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
[   41.301109] tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[   41.323377] cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
[   45.680961] wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #0)
[   45.753835] ivtv0: Correcting tveeprom data: no radio present on second unit
[   45.753837] ivtv0: Autodetected WinTV PVR 500 (unit #2)
[   45.837109] ivtv0: Encoder revision: 0x02050032
[   45.837301] ivtv0: Registered device video1 for encoder MPEG
[   45.837562] ivtv0: Registered device video32 for encoder YUV
[   45.837841] ivtv0: Registered device vbi1 for encoder VBI
[   45.838067] ivtv0: Registered device video24 for encoder PCM audio
[   46.207297] ivtv0: Initialized WinTV PVR 500 (unit #2), card #0
[   46.207310] ivtv:  ====================  END INIT IVTV  ====================
[ 6342.060076] ivtv0: All encoder YUV stream buffers are full. Dropping data.
[ 6342.060081] ivtv0: Cause: the application is not reading fast enough.


I am wondering if the pci slot I moved it too is working vs conflict
between the 2 cards?


More information about the mythtv-users mailing list