[mythtv-users] Nova-T 500 Remote Control

[KH Chai]

I couldn't determine which event it is.
It doesn't shows the name of the tuner card.
However, I specified it as "-H dev/input -d /dev/input/event7" in /etc/sysconfig/lircd.conf
Below is what I got from /proc/bus/input/devices

[root at localhost mythtv]# more /proc/bus/input/devices
I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
P: Phys=
S: Sysfs=/class/input/input0
H: Handlers=mouse0 event0 
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3

I: Bus=0003 Vendor=1241 Product=1503 Version=0110
N: Name="  USB Keyboard"
P: Phys=usb-0000:00:10.1-1/input0
S: Sysfs=/class/input/input1
H: Handlers=kbd event1 
B: EV=120003
B: KEY=10000 7 ff800000 7ff febeffdf f3cfffff ffffffff fffffffe
B: LED=7

I: Bus=0003 Vendor=1241 Product=1503 Version=0110
N: Name="  USB Keyboard"
P: Phys=usb-0000:00:10.1-1/input1
S: Sysfs=/class/input/input2
H: Handlers=kbd event2 
B: EV=3
B: KEY=39fa d941d101 1e0000 0 0 0

I: Bus=0003 Vendor=15ca Product=00c3 Version=0110
N: Name="USB Optical Mouse"
P: Phys=usb-0000:00:10.1-2/input0
S: Sysfs=/class/input/input3
H: Handlers=mouse1 event3 
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103

I: Bus=0003 Vendor=0810 Product=0001 Version=0110
N: Name="Twin USB Joystick"
P: Phys=usb-0000:00:10.2-2/input0
S: Sysfs=/class/input/input4
H: Handlers=event4 js0 
B: EV=b
B: KEY=fff 0 0 0 0 0 0 0 0 0
B: ABS=f0027

I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/class/input/input5
H: Handlers=kbd event5 
B: EV=40001
B: SND=6

I: Bus=0019 Vendor=0000 Product=0002 Version=0000
N: Name="Power Button (FF)"
P: Phys=ACPI_FPB/button/input0
S: Sysfs=/class/input/input6
H: Handlers=kbd event6 
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button (CM)"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/class/input/input7
H: Handlers=kbd event7 
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button (CM)"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/class/input/input8
H: Handlers=kbd event8 
B: EV=3
B: KEY=4000 0 0 0 0




-----Original Message-----
From: mythtv-users-bounces at mythtv.org [mailto:mythtv-users-bounces at mythtv.org] On Behalf Of Nicolas Will
Sent: Friday, January 04, 2008 4:06 PM
To: Discussion about mythtv
Subject: Re: [mythtv-users] Nova-T 500 Remote Control


On Fri, 2008-01-04 at 15:56 +0800, KH Chai wrote:
> Hi All,
> 
>  
> 
> I have trouble getting the Hauppauge Nova-T 500 remote control to work.  Anyone has success with this remote, please kindly guide me through the installation process.  I’ve been googling and found pieces of information everywhere but none works.  I’m running MythDora 4.  Thank you.

Mine works with no problem at all.

Config files there:


http://www.youplala.net/~will/htpc/LIRC/


Make sure that you have the correct /dev/input/eventX.

Nico

_______________________________________________
mythtv-users mailing list
mythtv-users at mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users