[mythtv-users] missing EIT for single transponder

Markus Schulz msc at antzsystem.de
Sat Feb 16 13:26:15 UTC 2008


Hello,

i'm using mythtv-trunk (Revision: 15948) with a dvb-c + dvb-s card.
the channels are mostly the same, cause my dvb-c provider dumps the 
signal from astra-19.2E into the cable network.

But for a single dvb-s transponder i got no EIT informations. The 
corresponding dvb-c transponder works fine. I can tune to each channel 
of this transponder but got no eit for the dvb-s one. 
Backend log produces the following messages on changing to one of the 
problematic channels:

2008-02-16 14:13:30.340 DTVSM(3) Error: Wrong PMT; pmt->pn(12090) 
desired(12003)
2008-02-16 14:13:30.375 EITHelper: Added 3 events
2008-02-16 14:13:30.396 DTVSM(3) Error: Wrong PMT; pmt->pn(12020) 
desired(12003)
2008-02-16 14:13:30.396 DTVSM(3) Error: Wrong PMT; pmt->pn(12080) 
desired(12003)
2008-02-16 14:13:30.449 DTVSM(3) Error: Wrong PMT; pmt->pn(12040) 
desired(12003)
2008-02-16 14:13:30.450 DTVSM(3) Error: Wrong PMT; pmt->pn(12060) 
desired(12003)
2008-02-16 14:13:30.503 DTVSM(3) Error: Wrong PMT; pmt->pn(12095) 
desired(12003)
2008-02-16 14:13:30.503 DTVSM(3) Error: Wrong PMT; pmt->pn(12005) 
desired(12003)
2008-02-16 14:13:30.503 DTVSM(3) Error: Wrong PMT; pmt->pn(12004) 
desired(12003)
2008-02-16 14:13:30.556 DTVSM(3) Error: Wrong PMT; pmt->pn(12061) 
desired(12003)
2008-02-16 14:13:30.556 DTVSM(3) Error: Wrong PMT; pmt->pn(12041) 
desired(12003)
2008-02-16 14:13:30.722 Finished recording Unbekannt: channel 15003


I've rescanned the transponder, only change was that "serviceversion" 
was incremented (24->27). All important data (networkid, transportid) 
was equal to the corresponding dvb-c transponder where eit works fine.

Any ideas?

-- 
Markus Schulz


More information about the mythtv-users mailing list