[mythtv-users] 6200ch will not change the channel on my DCT-6200

[Tom Flair]

On 9/28/07, Jerry Rubinow <jerrymr at gmail.com> wrote:
>
> On 9/28/07, Tom Flair <praetor.zero at gmail.com> wrote:
> > Plugreport gives me:
> > Host Adapter 0
> > ==============
> >
> > Node 0 GUID 0x001aadfffe4bcf7e
> > ------------------------------
> > oMPR n_plugs=1, data_rate=2, bcast_channel=0
> > oPCR[0] online=1, bcast_connection=0, n_p2p_connections=1
> >         channel=63, data_rate=2, overhead_id=0, payload=376
> > iMPR n_plugs=0, data_rate=2
> >
> > Node 1 GUID 0x0011d80000e7e3a4
> > ------------------------------
> > libiec61883 error: error reading oMPR
> > libiec61883 error: error reading iMPR
> >
> >
> >
> > 6200ch 46 -v gives me
> > starting with node: 1
> > node 1: vendor_id = 0x000011d8 model_id = 0x00000000
> > Could not find Motorola DCT-6200 on the 1394 bus.
>
> I think plugreport is saying there's nothing on node 1.  Try:
>
> 6200ch -n 0 46
>
> -Jerry


~ $ 6200ch -v -n 0 46
starting with node: 0
node 0: vendor_id = 0x00001aad model_id = 0x00006200
node 1: vendor_id = 0x000011d8 model_id = 0x00000000
Could not find Motorola DCT-6200 on the 1394 bus.

I also tried:

~ $ 6200ch -v -n 0 -p 0 46
starting with node: 0
node 0: vendor_id = 0x00001aad model_id = 0x00006200
node 1: vendor_id = 0x000011d8 model_id = 0x00000000
Could not find Motorola DCT-6200 on the 1394 bus.

~ $ 6200ch -v -n 0 -p 1 46
couldn't set port: Invalid argument


Just to be on the safe side:

~ $ 6200ch -v -n1 46
starting with node: 1
node 1: vendor_id = 0x000011d8 model_id = 0x00000000
Could not find Motorola DCT-6200 on the 1394 bus.


As noted before, the vendor_id and model_id have changed from when I first
e-mailed.  The master backend and dct stayed powered up, neither were
reset.  The only thing that I did was changed the channel manually and
recorded South Park.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20070928/5cbabe21/attachment.htm