[mythtv-users] DVI connection overscan
Piotr Romanus
lromanus at ftml.net
Thu May 24 22:30:37 UTC 2007
On Sat, 14 Apr 2007 14:23:09 -0400, "Raphael" <rpooser at gmail.com> said:
> I also have a DVI-HDMI cable hooked up to my TV, and at first there was
> an insane amount of overscan. Messing around with the modeline you can
> get rid of some of it. I used xvidtune and found a modeline I liked.
In my case the modelines that I've tried seem to be ignored. Each time I
try a new modeline I find "No valid modes for "1920x1080_cust" " message
in my Xorg.log:
(**) NVIDIA(0): Option "XvMCUsesTextures" "false
(**) NVIDIA(0): Option "ModeValidation" "NoVertRefreshCheck,
NoMaxSizeCheck, NoEdidDFPMaxSizeCheck, NoMaxPClkCheck"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): NVIDIA GPU GeForce FX 5200 at PCI:1:0:0
(--) NVIDIA(0): VideoRAM: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 04.34.20.23.aa
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce FX 5200 at
PCI:1:0:0:
(--) NVIDIA(0): Samsung (DFP-0)
(--) NVIDIA(0): Samsung (DFP-0): 135.0 MHz maximum pixel clock
(--) NVIDIA(0): Samsung (DFP-0): Internal Single Link TMDS
(II) NVIDIA(0): Mode Validation Overrides for Samsung (DFP-0):
(II) NVIDIA(0): NoMaxPClkCheck
(II) NVIDIA(0): NoMaxSizeCheck
(II) NVIDIA(0): NoVertRefreshCheck
(II) NVIDIA(0): NoEdidDFPMaxSizeCheck
(II) NVIDIA(0): Assigned Display Device: DFP-0
(WW) NVIDIA(0): No valid modes for "1920x1080_cust"; removing.
(WW) NVIDIA(0):
(WW) NVIDIA(0): Unable to validate any modes; falling back to the
default mode
(WW) NVIDIA(0): "nvidia-auto-select".
(WW) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
(--) NVIDIA(0): DPI set to (304, 304); computed from "UseEdidDpi" X
config option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
Here is my xorg.conf:
Section "Monitor"
Identifier "LN-S4095D"
# Option "DPMS"
HorizSync 30-80
# VertRefresh 56-75
ModeLine "1920x1080_cust" 74.25 1920 2008 2056 2208 1080
1084 1094 1132 +hsync +vsync interlace
# Option "ModeValidation" "NoEdidModes"
# Option "UseEdidDpi" "FALSE"
Option "ModeValidation" "NoVertRefreshCheck,
NoMaxSizeCheck, NoEdidDFPMaxSizeCheck, NoMaxPClkCheck"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV34 [GeForce FX 5200]"
Driver "nvidia"
Option "XvmcUsesTextures" "false"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV34 [GeForce FX 5200]"
Monitor "LN-S4095D"
# Option "TVStandard" "HD1080p"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080_cust"
EndSubSection
EndSection
I wonder what is wrong with the above modeline.
Piotr
More information about the mythtv-users
mailing list