[mythtv-users] Scan for channels not working with 2.6.20 kernel

[Mitko Haralanov]

On Fri, 11 May 2007 00:14:14 -0400
"Todd Ignasiak" <ignasiak at gmail.com> wrote:

> This is on Feisty x86-64, Athlon64, kernel 2.6.20-15.  pchdtv HD3000
> and DVico FusionHDTV3.  QAM cable source,  high channel scan, it
> picked up my handful of clear local QAM256 channels.

Thanks for the reply!

My install is also a fresh one (re-partitioned and re-formatted disks).
My configuration is FC6 x86_64, dual core Athlog64 2000, kernel
2.6.20-1.2948.fc6, pdhdtv3000 and 3 pvr-250's. I am not scanning QAM
just Broadcast with Terrestrial 8-VSB.

The output of mythtv-setup for one of the channels is:
2007-05-10 21:56:35.657 SIScan(0): Tuning to ATSC Channel 2 mplexid(-1)
2007-05-10 21:56:35.657 SM(0)::AddFlags: Seen() Match() Wait()
2007-05-10 21:56:35.657 DVBChan(0): Old Params: Frequency: 0
Modulation: QPSK DVBChan(0): New Params: Frequency: 57000000
Modulation: QPSK 
2007-05-10 21:56:35.658 DVBChan(0): Tune(): Tuning to 57000000Hz 
2007-05-10 21:56:35.658 dvbchannel.cpp:wait_for_backend: Status: 
2007-05-10 21:56:35.658 DVBChan(0): Tune(): Frequency tuning
successful. 
2007-05-10 21:56:35.658 DTVSM(0)::SetChannel(-1, -1): 
2007-05-10 21:56:35.658 SM(0)::Start: begin
2007-05-10 21:56:35.659 SM(0)::Start: end
2007-05-10 21:56:38.660 SIScan(0): Timeout Scanning ATSC Channel 2 --
no signal 
2007-05-10 21:56:38.660 DVBSM(0)::Stop: begin
2007-05-10 21:56:38.660 SM(0)::Stop: begin
2007-05-10 21:56:38.803 SM(0)::Stop: end
2007-05-10 21:56:38.803 DVBSM(0)::Stop: end
2007-05-10 21:56:38.803 SIScan(0): HandlePostInsertion() pat(0)

What is odd is that scandvb shows that the frequecy for channel 2 (or
at least that channels that is supposed to be 2) is 725028615 and
mythtv-setup shows 57000000
-- 
Mitko Haralanov
voidtrance at comcast dot net
http://voidtrance.home.comcast.net
==========================================