[mythtv-users] Audio on PVR-250

Brett Swaim kf6zql at gmail.com
Sun Feb 11 16:45:16 UTC 2007


I have my pvr-250 setup like this, it should be the same for you:

I'm using s-video from my sat box
I have an rca to 8mm adapter plugged into the audio in on the pvr-250 (next
to the ir blaster port)
in myth, I select my pvr-250 card and choose input as s-video

That's it, everything works from there. Is that how you have it setup
(exchange s-video with composite)?

On 2/10/07, Dave Pearson <lists at netsalve.com> wrote:
>
> Hi,
>
> Can someone help me get the Audio working on a PVR-250 in my Ubuntu Edgy
> Slave Backend. I'm very nearly there with it - I have a good picture
> from the composite input (I'm not interested in the Antenna input as I
> have a pair of DVB-T cards for that) which is connected to the Satellite
> receiver. The problem is that I can only get "white noise" audio from
> the card, I have a PVR-250 in the master backend that works perfectly,
> but this one is a different revision and has a different tuner. this is
> the output from dmesg:
>
> [17179598.264000] ivtv:  ==================== START INIT IVTV
> ====================
> [17179598.264000] ivtv:  version 0.7.0 (tagged release) loading
> [17179598.264000] ivtv:  Linux version: 2.6.17-10-generic SMP mod_unload
> 586 REGPARM gcc-4.1
> [17179598.264000] ivtv:  In case of problems please include the debug
> info between
> [17179598.264000] ivtv:  the START INIT IVTV and END INIT IVTV lines,
> along with
> [17179598.264000] ivtv:  any module options, when mailing the ivtv-users
> mailinglist.
> [17179598.264000] ivtv0: Autodetected Hauppauge WinTV PVR-250 card
> (cx23415 based)
> [17179598.264000] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level,
> low) -> IRQ 209
> [17179598.264000] ivtv0: Unreasonably low latency timer, setting to 64
> (was 32)
> [17179598.312000] tveeprom 0-0050: Hauppauge model 48015, rev F235,
> serial# 5194686
> [17179598.312000] tveeprom 0-0050: tuner model is Temic 4066FY5 (idx 35,
> type 18)
> [17179598.312000] tveeprom 0-0050: TV standards PAL(I) (eeprom 0x10)
> [17179598.312000] tveeprom 0-0050: audio processor is MSP3415 (idx 6)
> [17179598.312000] tveeprom 0-0050: has radio
> [17179598.392000] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> [17179598.648000] saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver
> #0)
> [17179598.800000] msp3400 0-0040: MSP3415D-B3 found @ 0x80 (ivtv i2c
> driver #0)
> [17179598.800000] msp3400 0-0040: MSP3415D-B3 supports nicam, mode is
> autodetect
> [17179599.452000] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> [17179599.464000] ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
> [17179599.688000] ivtv0: Encoder revision: 0x02050032
> [17179599.696000] ivtv0: Decoder revision: 0x02020023
> [17179599.696000] ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768
> buffers (4096KB total)
> [17179599.696000] ivtv0: Allocate DMA encoder YUV stream: 161 x 12960
> buffers (2048KB total)
> [17179599.696000] ivtv0: Allocate DMA encoder VBI stream: 80 x 26208
> buffers (2048KB total)
> [17179599.696000] ivtv0: Allocate DMA encoder PCM audio stream: 455 x
> 4608 buffers (2048KB total)
> [17179599.696000] ivtv0: Create encoder radio stream
> [17179599.696000] tuner 0-0061: type set to 18 (Temic PAL_I (4066 FY5))
> [17179599.780000] ivtv0: Initialized Hauppauge WinTV PVR-250, card #0
> [17179599.780000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level,
> low) -> IRQ 217
> [17179599.780000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
> [17179599.780000] ivtv:  ====================  END INIT IVTV
> ====================
>
> Regards,
> Dave.
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20070211/13223467/attachment.htm 


More information about the mythtv-users mailing list