[mythtv-users] Remote Control Problem
KH Chai
khchai at ceedtec.com
Fri Dec 21 11:48:05 UTC 2007
I'm using Mythdora so the lircd.conf is in /etc/ instead of /etc/lirc/
directory.
I copy and paste the file that matches my remote control = Hauppauge WinTV
Nova-T-500.
Do I need to chmod this file?
By the way, the firmware that I downloaded is dvb-usb-dib0700-1.10.fw
It doesn't show in lsmod | grep lirc though.
Any idea? Thanks.
KH
From: mythtv-users-bounces at mythtv.org
[mailto:mythtv-users-bounces at mythtv.org] On Behalf Of Phil
Sent: Friday, December 21, 2007 7:14 PM
To: Discussion about mythtv
Subject: Re: [mythtv-users] Remote Control Problem
Looks like everything is loaded fine. So possibly a problem with your config
file (/etc/lirc/lircd.conf) - if it can't recognise your remote then you
won't get any output from irw.
You need to make sure that the config for your Hauppage remote is included
in the lircd.conf file - and there's a few different remotes so you may have
the wrong one. Put them all in, provided they have different names it won't
matter.
Also check that your ir receiver is plugged in to your Hauppage card!
Phil
KH Chai wrote:
This is the output I got from lsmod | grep lirc
[mythtv at localhost ~]$ lsmod | grep lirc
lirc_i2c 11780 0
lirc_dev 15860 1 lirc_i2c
i2c_core 27841 14
cx88xx,bttv,lirc_i2c,ivtv,i2c_algo_bit,tveeprom,mt2060,i2c_viapro,dib7000m,d
ib7000p,dvb_usb,dvb_pll,dib3000mc,dibx000_common
Not sure what that tells me though. Thanks
KH
-----Original Message-----
From: mythtv-users-bounces at mythtv.org
[mailto:mythtv-users-bounces at mythtv.org] On Behalf Of Ma Begaj
Sent: Friday, December 21, 2007 4:34 PM
To: Discussion about mythtv
Subject: Re: [mythtv-users] Remote Control Problem
2007/12/21, KH Chai <mailto:khchai at ceedtec.com> <khchai at ceedtec.com>:
All,
The problem of can't getting the remote control to work has been bugging
me
for a few weeks now. It worked once, then I do an updates, causing it to
stop working. I reinstalled Mythdora at least half a dozen times, but
still
can't get the remote control to work. I followed the installation guide
from mythtv.org for my Hauppauge WinTV Nova-T-500. Everything seems to be
installed ok, but it doesn't response to the remote control input using
"irw" command. These are the commands I know for checking, and they all
says the remote control is running fine, BUT it never works!!! Any help
would be GREATLY appreciated. Thank you.
[root at localhost mythtv]# service lircd status
lircd (pid 2867) is running...
[root at localhost mythtv]# dmesg | grep lirc
lirc_dev: IR Remote Control driver registered, major 61
[root at localhost Desktop]# ps -e|grep lirc
2867 ? 00:00:00 lircd
[root at localhost mythtv]# sudo lircd -n -d /dev/lirc0
lircd: there seems to be already be a lircd process with pid 2867
lircd: otherwise delete stale lockfile /var/run/lircd.pid
[root at localhost Desktop]# service lircd restart
Stopping infrared remote control daemon: [ OK ]
Starting infrared remote control daemon: [ OK ]
[root at localhost Desktop]# irw
*** REALLY HOPE IT RESPONSES WHEN I PRESS MY REMOTE CONTROL HERE ***
Are you lirc modules loaded? (lsmod | grep lirc)
_______________________________________________
mythtv-users mailing list
mythtv-users at mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________
mythtv-users mailing list
mythtv-users at mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20071221/cf403a32/attachment.htm
More information about the mythtv-users
mailing list