[mythtv-users] Samsung DLP xorg.conf

vamythguy vamythguy at gmail.com
Thu Apr 5 07:40:24 UTC 2007


I'm having some issues getting X to run:

(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "IgnoreEDID" "true"
(**) NVIDIA(0): Option "XvMCUsesTextures" "true"
(**) NVIDIA(0): Option "UseEdidDpi" "FALSE"
(**) NVIDIA(0): Enabling RENDER acceleration
(WW) NVIDIA(0):
(WW) NVIDIA(0): The IgnoreEDID and NoDDC options have been deprecated.  The
(WW) NVIDIA(0):     NVIDIA X driver makes use of a display device's EDID
(WW) NVIDIA(0):     during construction of its modePool.  It is recommended
(WW) NVIDIA(0):     that you allow the X driver to make use of any available
(WW) NVIDIA(0):     EDID.  If, however, you know what you are doing and have
(WW) NVIDIA(0):     good reason to do so, you can disable the X driver's use
(WW) NVIDIA(0):     of EDIDs by setting the "UseEDID" X configuration option
(WW) NVIDIA(0):     to FALSE; e.g.,
(WW) NVIDIA(0):
(WW) NVIDIA(0):   Option "UseEDID" "FALSE"
(WW) NVIDIA(0):
(WW) NVIDIA(0): Note that, rather than globally disable all uses of the
EDID,
(WW) NVIDIA(0):     you can individually disable each particular use of the
(WW) NVIDIA(0):     EDID; e.g.,
(WW) NVIDIA(0):
(WW) NVIDIA(0):   Option "UseEDIDFreqs" "FALSE"
(WW) NVIDIA(0):   Option "UseEDIDDpi" "FALSE"
(WW) NVIDIA(0):   Option "ModeValidation" "NoEdidModes"
(WW) NVIDIA(0):
(WW) NVIDIA(0): See Appendix D: X Config Options in the README for details
on
(WW) NVIDIA(0):     each of these options.
(WW) NVIDIA(0):
(EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
(EE) NVIDIA(0):     log file that the GLX module has been loaded in your X
(EE) NVIDIA(0):     server, and that the module is the NVIDIA GLX module.
If
(EE) NVIDIA(0):     you continue to encounter problems, Please try
(EE) NVIDIA(0):     reinstalling the NVIDIA driver.
(EE) NVIDIA(0): Failed to load the NVIDIA kernel module!
(EE) NVIDIA(0):  *** Aborting ***
(II) UnloadModule: "nvidia"
(II) UnloadModule: "ramdac"
(II) UnloadModule: "fb"
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found



My xorg.conf is:

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
        Identifier     "Default Layout"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of
the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        ModulePath   "/usr/X11R6/lib64/modules/extensions/nvidia"
        ModulePath   "/usr/X11R6/lib64/modules/extensions"
        ModulePath   "/usr/X11R6/lib64/modules"
        ModulePath   "/usr/lib64/xorg/modules/extensions/nvidia"
        ModulePath   "/usr/lib64/xorg/modules/extensions"
        ModulePath   "/usr/lib64/xorg/modules"
        FontPath     "unix/:7100"
EndSection

Section "Module"
        Load  "v4l"
        Load  "dbe"
        Load  "extmod"
        Load  "fbdevhw"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "type1"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#       Option  "Xleds"         "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#       Option  "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#       Option  "XkbModel"      "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#       Option  "XkbModel"      "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#       Option  "XkbLayout"     "de"
# or:
#       Option  "XkbLayout"     "de"
#       Option  "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#       Option  "XkbOptions"    "ctrl:swapcaps"
# Or if you just want both to be control, use:
#       Option  "XkbOptions"    "ctrl:nocaps"
#
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "us"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "IMPS/2"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "yes"
EndSection

Section "Monitor"

        #DisplaySize  1100      620
        #HorizSync    30.0 - 61.0
        #VertRefresh  56.0 - 85.0
#       Option      "dpms"
 ### Comment all HorizSync and VertSync values to use DDC:
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "SAMSUNG DLP"
 ### Comment all HorizSync and VertSync values to use DDC:
        HorizSync    45.0 - 45.0
        VertRefresh  60.0 - 60.0
        ModeLine     "ATSC-720-60p" 74.2 1280 1320 1376 1648 720 722 728 750
EndSection

Section "Device"

#       VendorName  "Videocard vendor"
#       BoardName   "VESA driver (generic)"
        Identifier  "Videocard0"
        Driver      "nvidia"
        VendorName  "nVidia Corporation"
        BoardName   "6600GT"
        Option      "XvMCUsesTextures" "true"
        Option      "UseEdidDpi" "FALSE"
        Option      "IgnoreEDID" "true"
        BusID       "PCI:1:0:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        Monitor    "Monitor0"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     1
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     4
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     8
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     15
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     16
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

ction "Files"
EndSection

Section "Module"
EndSection
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20070405/a63592f2/attachment-0001.htm 


More information about the mythtv-users mailing list