[mythtv-users] IR Blaster and Channel change script for Myth TV

[Ramanraj Vamsi]

Hi Nick,

When I did run the power_send script no power code turned off my STB.


On 9/11/06, Rick <ve1gn at nb.sympatico.ca> wrote:
>
> Nick wrote:
> > On 09/09/06, Ramanraj Vamsi <ramanrajvamsi at gmail.com> wrote:
> >> Hi Nick,
> >>
> >>  One more thing I still haven't found the code set for my HUMAX
> ND-1000C(?)
> >>  So,how can I make my change channel script work for my myth tv?
> >
> > Raj,
> >
> > I suggest you read through the blog again \slowly\, especially on the
> > section for configuring the IR blaster. The whole point of running the
> > send_power_script is to determine which codeset is the correct one for
> > your STB, not just to see blinking lights on the dongle.
> >
> > When the script has shown you which power code turns off your STB, you
> > then need to remove all of the other blaster definitions from
> > /etc/lircd.conf, leaving just the correct codeset for the IR blaster
> > \and\ the codeset for your PVR-150 remote control.
> >
> > Importantly, you need to note the name of the codeset that turns off
> > your STB when you run the send_power_script, as this is the name you
> > need to put in the channel change script. Also, once you have removed
> > all of the incorrect codesets from your lircd.conf file, you should
> > rename the number keys. In the blog's config file, they are named like
> > "KEY_0" or "KEY_0". The channel change scripts normally want the
> > numerical buttons to have names like "0" or "1" - this is so MythTV
> > can just pass the channel numbers to the script.
> >
> > Once you have identified the correct codeset, reconfigured the
> > channel_change script to use the name of the correct definition, and
> > renumbered the numerical buttons as above, you \should\ be up and
> > running.
> >
> > Nick
> >
>
> The code for HUMAX is 0863.  I don't know if this would be the same
> model as you have.
>
> Rick
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20060916/fa8c2f19/attachment.htm