[mythtv-users] OT. Howto diagnose machine dying/crashing
mark at ripitup.ca
Fri Sep 15 17:56:40 UTC 2006
On Friday 15 September 2006 11:50, Mark wrote:
> On Friday 15 September 2006 11:44, Tim Berger wrote:
> > Let me take a wild guess - you're using xfs, aren't you?
> > There's going to be a lot of people on this list with high praise for
> > xfs, but on a 2.6 kernel with 4k stacks, there's a high likelihood of
> > oopsing the kernel, especially when layered with raid and nfs. ext3
> > works just fine with myth, and it's *stable*.
> > http://oss.sgi.com/archives/xfs/2005-07/msg00041.html
> > In any event, netdump is a great tool to capture an entire oops message
> > with these sort of lockups, if it indeed it's oopsing.
> > On 9/15/06, Mark <mark at ripitup.ca> wrote:
> > > Combined NFS server / mythfront end box. Mythbackend on another machine
> > > uses
> > > the NFS.
> > >
> > > I have a 1TB software raid ( 4 x 320 IDE drives ) and a single sata
> > > drive (
> > > FC5 OS is on it ).
> > >
> > > About every week or 10 days, this box just up and dies. No
> > > /var/log/messages
> > > entries ( you just see the reboot ), nothing on the screen etc...
> > > I have a 410 watt power supply, a couple of fans, it seems cool, low
> > > load etc....
> > > I am not sure what could be causing this and I am getting no info from
> > > it that
> > > helps me diagnose it further. SMART tests on the disks show all OK.
> > > It does
> > > seem to be load related because I have reproduced it once by
> > > transfering a hundred or so gigs of data into it and it died then.
> > > FC5, mdadm raid..
> > > The RAID is broken into one drive per bus ( onboard primary and
> > > secondary and
> > > an IDE PCI card with pri and sec as well ) I use to have all 4 drives
> > > on the
> > > master/slave of the built in IDE ports, but broke them up into their
> > > own bus
> > > as I thought that might be causing this.
> > >
> > > Any thoughts on what to try, look for, etc....?
> > >
> > > Thanks!
> > >
> > > Mark
> > >
> > > _______________________________________________
> > > mythtv-users mailing list
> > > mythtv-users at mythtv.org
> > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> Interesting. Actually you are right, I am using XFS. I wonder if this
> could be the reason. I am unable to switch now to JFS or EXT3 as I have
> 700Gigs of data on it. Hmmmm. I am trying to get a crashdump to no avail.
> I have been trying to setup netdump and I keep getting this error ( yes I
> have setup the server and client with NETDUMPADDR=192.168.0.2 ) but here is
> what I get one start of netdump client:
> netdump: cannot arp on eth0
> netdump: cannot find 192.168.0.2 in arp cache
> netdump: can't resolve 192.168.0.2 MAC address
> netdump server address resolution [FAILED]
> I have DEV=eth0 set as well which is correct.
> Better ways to catch what is happening on a crash?
> mythtv-users mailing list
> mythtv-users at mythtv.org
Also, I thought that XFS handled large files/deletes alot faster than ext3?
No? Are others using ext3 with 1Tb + ?
More information about the mythtv-users